Sensors and Solenoids
Haltech - Oil Temperature sensor High Range Thread: 1/8 NPT 27TPI
Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306
Haltech - Air Temp Sensor Thread: 1/4 NPT
Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX. Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 d...
View full detailsHaltech - Air Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI
Air Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010202
Haltech - Pressure Sensor Extension Kit Length: 450mm (18")
Pressure Sensor Extension Kit. Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8t...
View full detailsHaltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...
View full detailsHaltech - 3 Bar GM MAP Sensor
Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...
View full detailsLink ECU - Boost Control Solenoid - 4 Port (4BCS)
Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...
View full detailsLink ECU - Adapter M10 x 1 Female to 1/8 BSP Male
Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.
Link ECU - Throttle Position Sensor (TPSCW/CCW)
Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...
View full detailsLink ECU - Pressure Sensor (PS150)
Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...
View full detailsLink ECU - Mounting Boss (IAT1-8MS)
Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors ...
View full detailsLink ECU - KnockBlock G4+ (KNB)
The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...
View full detailsLink ECU - AIM GPS09 Module for AIM Dashes
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...
View full detailsTurbosmart - 4 Port Boost Solenoid Kit
PART NUMBER: TS-0301-2003Solenoid (4 Port) Suit Turbosmart Boost Controllers (e-Boost2 and e-Boost Street). Upgrades for Turbosmart eBoost2 and eB...
View full detailsTurbosmart - 3 Port Boost Solenoid Kit
Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a br...
View full detailsExhaust Gas Temperature Probe (EGT) | 101-0146
Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...
View full detailsPrecision Turbo & Engine - Compressor Wheel Speed Sensor
Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...
View full detailsBosch - DF11S Wheel Speed Sensor
Description - DF11s Hall effect principle- Suitable for Wheelspeed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with ABS...
View full detailsSyltech - MSPP 35BAR (507.6PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G35-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 135BAR (1958PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G135-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Constructio...
View full detailsSyltech - MSPP 3 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A03-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 5 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A05-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSCS 5 BAR ABSOLUTE (MAP) Pressure & Fast Response Temperature Sensor
Part Number: MSCS-4P-A05-N8 Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Shallow Position Exposed Glass Tip w/ Flyleads - EAT G25)
Part Number: MSTS-FL-EAT-SS-G25 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Shallow Position Exposed Glass Tip - EAT G25)
Part Number: MSTS-2P-EAT-SS-G25 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Post Cooler Shallow Position Exposed Glass Tip w/ Flyleads - EAT G15)
Part Number: MSTS-FL-EAT-SS-G15 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response IAT - Post Cooler (Shallow Position Exposed Glass Tip - EAT G15)
Part Number: MSTS-2P-EAT-SS-G15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsHaltech - Bosch 4000psi Fluid Pressure and Temperature Sensor Thread: M10 x 1.0
Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...
View full detailsHaltech - TMS-4 Tyre Monitoring System Internal Sensors
TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...
View full detailsHaltech - Throttle Position Sensor - Grey CW
Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...
View full detailsHaltech - Throttle Position Sensor - Black CCW
Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...
View full detailsHaltech - Throttle Position Sensor - Motorsport Contactless
Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...
View full detailsHaltech - Coolant Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI
Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...
View full detailsHaltech - Coolant Temp Sensor Thread: 1/8 NPT 27TPI
Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...
View full detailsHaltech - Plug and Pins Only - Flex Fuel Composition Sensor
Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001
Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...
View full detailsHaltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...
View full detailsHaltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT
Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...
View full detailsHaltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT
Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...
View full detailsHaltech - 1 Bar GM MAP Sensor
Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...
View full detailsHaltech - CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Thread: 1/8 NPT
CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...
View full detailsHaltech - Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style Motor
Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305
Haltech - Analogue Output Adaptor
Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...
View full detailsHaltech - Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit
Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105
Haltech - Pro Tuner "Knock Ears" Kit Dual Channel 2014 Spec
Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...
View full detailsTurbosmart - Modular Reference Distribution Block (6 Port) 1/8NPT
The Turbosmart Modular Reference Manifold, is an expandable, professional solution for remote mounting and sharing of engine (MAP) reference ...
View full detailsTurbosmart - Modular Combo Block (4 Port & 2 Channel) 1/8NPT
The Turbosmart Modular Combo (Reference & Sensor) Manifold, is an expandable, professional solution for remote mounting expensive and delic...
View full detailsTurbosmart - Modular Remote Sensor Block (3 Channel) 1/8NPT
The Turbosmart Modular Remote Sensor Manifold, is an expandable, professional solution for remote mounting expensive and delicate sensors away fr...
View full details