Forced Induction

NITTO's oil drain for the Nissan RB20/25/26 head helps alleviate the all too common issue of excessive oil build up in the head area. This problem ...

This is a PREMIUM turbo line kit for the RB platform to suit a high mount manifold such as 6boost/Hypertune or even a low mount setup such as the O...

The Turbosmart GenV ProGate50 external wastegate is a cost effective, high performing 50mm external wastegate. The GenV provides extensive user c...

Just purchased a high mount turbo kit and need a new intake kit? This complete kit features products that we use with all our skyline builds, you c...

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

This manifold uses 33MM ID runners along with reduced runner length to aid in turbo response and a reduction in lag. It’s a Reverse Rotation design...

This well-engineered piece of gear is specifically designed to maximise fluid flow out of the back of the Nissan RB cylinder head where it needs it...

PLEASE ALLOW 8-12 WEEKS FOR MANUFACTURE - ALL PLAZMAMAN ITEMS ARE MADE TO ORDER AND ALL LEAD TIMES ARE APPROXIMATE ESTIMATIONS. Keep it legal and r...

DESCRIPTION: 0.065-inch port oil feed flange with integrated -4 AN. INSTALLATION COMPONENTS: (one unit) Oil inlet feed O-Ring; (two units) M8X1.25 ...

RB 70mm V-Band (Big Daddy)Finally, we can show you one of our most complex designs and just like our RB High Response manifold (Reverse Rotation), ...

Enhance the performance and durability of your Nissan RB25 engine with our precision-engineered Heat Shield. Designed to bolt seamlessly onto the e...

Part Number: AF8207-4000 Model - Nissan RB20, RB25 & RB26 (single turbo conversion) turbo steampipe manifold.Turbo Collector Flange - V-B...

Aftermarket Turbo Elbow bolt kit to suit R33/R34 OEM RB25DET Turbochargers such as the 21U or the OP6. Consists of: 2 x Long Bolts 1 x Short Bolt ...

The Aeroflow Performance external wastegate bag / blanket range provides high quality material selection, design, and construction, whilst at an af...

Nissan RB V-Band Reverse Rotation Thermal Management Blanket to suit our Nissan RB V-Band Reverse Rotation Exhaust Manifold. This beanie will help ...

T51R Mod compressor cover will give your turbocharger the classic jet spool/whistle sound. Description T51R MOD FAQ 1. Does this mod help my turbo ...

Turbosmart mechanical boost gauge is the perfect accessory for any of our Gated Boost Control Valves Featuring simple mechanical operation, a black...

PLEASE NOTE: If you require a full turbo drain kit with fittings to suit, please CLICK HERE.Aeroflow's universal flexible turbo drains are designed...

***THIS BEANIE WILL NOT FIT ANYTHING OVER GT40 SIZE, PLEASE SEE OUR OTHER LISTING FOR GT42 AND T04 TURBO BEANIES*** The Aeroflow Performance turbo ...

**ONLY TWO UNITS AVAILABLE - NEVER TO BE RESTOCKED AGAIN****AVAILABLE IN TEXTURED BLACK AND SATIN BLACK**Treat your R33 Skyline to this AT performa...

*DO NOT MISS OUT - THESE PRICES WILL NEVER BE REPEATED****LIMITED STOCK - SUITS RB20/RB25/RB26*** The Skyline Shed is proud to bring you a quality ...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

This Aeroflow Performance cast 304 stainless steel manifold adaptor will convert your standard Ford XR6 turbo from the factory 5 bolt flange to a 3...

**THE ULTIMATE RESPONSE FOR STOCK MANIFOLD LOW MOUNT SETUPS, WE RECOMMEND PAIRING THIS UP WITH A V-BAND ADAPTOR WHICH YOU CAN FIND BY CLICKING HERE...

Part Number: AF9552-1002 Aeroflow Performance wastegates are especially designed to maintain set boost levels to protect your engine from ...

Dual Ceramic Ball Bearing System 9 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology Inconel 713c 10 Blade Turbine Wheel Ge...

Description Oil Drain Flange Install Kit for PT/X28 PT/X30 PT/X35 PTG Series -Item Details:Excellent quality Extended billet aluminum oil drain ...

Material: Inside - Flexible Metal Outside - Volcanic Lava Rock Max Temperature Rating: 1200 °C

Aeroflow 4 inch turbo guard. Protect your turbocharger and engine internals from debris at the track or on the road. These stainless honeycomb turb...

**THESE KITS ARE MADE TO ORDER - PLEASE ALLOW UP TO 4 WEEKS FOR PROCESSING** PLEASE NOTE: This Turbo Kit is to suit Nissan RB20, RB25, RB26 as well...

Part Number: TS-0303-1001 The Turbosmart Manual Fuel Cut Defener (FCD-1) allows for an accurate increase in the factory fuel cut-out level without ...

**1 UNIT AVAILABLE - NEVER TO BE RESTOCKED AGAIN****AVAILABLE IN TEXTURED BLACK ONLY**Treat your R33 GTS / GTST Skyline to this AT Performance Cool...

**ONE UNIT AVAILABLE - NEVER TO BE RESTOCKED AGAIN** **AVAILABLE IN TEXTURED BLACK ONLY** Treat your R34 GT / GTT Skyline to this AT Performance Wa...

**3 UNITS AVAILABLE - NEVER TO BE RESTOCKED AGAIN****AVAILABLE IN SATIN BLACK AND TEXTURED BLACK - LEAVE A NOTE IN THE CART AREA FOR WHICH COLOUR Y...

All 6Boost manifolds are individually hand made in Australia. They are specifically designed for your application and built around unique "merge co...

All 6Boost manifolds are individually hand made in Australia. They are specifically designed for your application and built around unique "merge co...

All 6Boost manifolds are individually hand made in Australia. They are specifically designed for your application and built around unique "merge co...

All 6Boost manifolds are individually hand made in Australia. They are specifically designed for your application and built around unique "merge co...

!! THIS LISTING IS TO SUIT AN RB30 BLOCK WITH AN RB26 CYLINDER HEAD !!If you have a standard RB26 Head / Block please see our other listings!All 6B...

Model - Nissan RB20 / RB25 / RB26 engine turbo steampipe manifold.Turbo Collector Flange - T4 twin entry.Mounting Location - High Mount Forward Pos...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...