Aeroflow - B5455 T3 .83 Internal Wastegate Turbocharger (G30-660)

**THE ULTIMATE RESPONSE FOR STOCK MANIFOLD LOW MOUNT SETUPS, WE RECOMMEND PAIRING THIS UP WITH A V-BAND ADAPTOR WHICH YOU CAN FIND BY CLICKING HERE**

BOOSTED B5455 T3 Internal Wastegate Turbocharger Specifications

Recommended horsepower rating:  350-660HP
Recommended engine displacement:  1.4L to 3.0L

- Dual ceramic ball bearing
- Point Milled 7075 billet compressor wheel
- Ported shroud compressor cover
- Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
- 1/8" NPT boost reference port
- External wastegate sold separately
- Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
- T3 single entry turbine inlet flange
- 9 blade turbine wheel
- SiMo-nodular cast iron rear housing
- 5-Bolt Ford XR6 turbine outlet flange
- 4 x M14 x 1.5mm coolant ports (Must install water lines on opposite sides of the core)
- 7/16"-24 oil feed fitting with in-built restrictor
- 38mm bolt centre turbo drain flange with M8 x 1.25mm thread size
- Billet Internal wastegate actuator with 9psi spring (different rate springs sold separately)
- Internal wastegate hole size is 32mm

Compressor Specifications
Inducer:  54.25mm
Exducer:  67.40mm
Extended Tip:  69.76mm
A/R:  0.70
Compressor Inlet:  3" Slip fit
Compressor Outlet:  2" Slip fit

Turbine Specifications
Inducer:  60mm
Exducer:  55mm
A/R:  0.82
Turbine Inlet Flange:  T3
Turbine Outlet Flange:  BA-BF XR6 5-Bolt

Wastegate
Internal wastegate featuring 32mm port and 14psi actuator

Part Number: AF8005-3076