Sensors and Solenoids
Syltech - 1/8″ MSCS Pressure and Temp COMBO Sensor
After the successful stainless DTM temp sensors & precision pressure & MAP sensors, Syltech has graced us with their new Pressure + Temper...
View full detailsHaltech - WB1 - Single Channel CAN O2 Wideband Controller Kit
Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on ...
View full detailsHaltech - Fuel Sensor
Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.Part Numbers: HT-011000 - Flex Fuel Sensor H...
View full detailsHaltech - Boost Control Solenoid 3 Port 33Hz Thread: 1/8 NPT
Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...
View full detailsLink ECU - CAN Lambda (CANLAM)
Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...
View full detailsHaltech - EGT Open Tip Thermocouple
SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Do...
View full detailsSyltech - MSTS SS Series Motorsport Stainless Steel Temp Sensors
Open Element “Fast Response” IAT Temp Sensor, 1/8" NPT, -30 to 150degC Closed Element Fluid Temp Sensor, 1/8" NPT, -30 to 200degC Unlike others on ...
View full detailsPlatinum Racing Products - Drive By Wire Pedal & Throttlebody Kit to Suit Nissan R Chassis
We have developed a complete DBW kit to swap out that cable old throttle and laggy throttle pedal in your Nissan R Chassis to install new electroni...
View full detailsHaltech - GPS Speed Input Module
Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins
Haltech - Boost Control Solenoid 4 Port Thread: 1/8 NPT
Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...
View full detailsLink ECU - Air Temp Sensor (IAT1-8)
Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Syltech - MSPP 10BAR (145PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G10-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsHaltech - Bosch 145 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0
Bosch 145 PSI Fluid Pressure and Temperature SensorThread: M10 x 1.0Please take care when wiring this sensor as incorrect wiring will damage this s...
View full detailsHaltech - 4 Bar Motorsport MAP Sensor
Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...
View full detailsHaltech - LSU4.9 Wideband Hardware Pack
Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...
View full detailsSplitfire - Splitfire DIS008 Coilpacks to suit RB25 NEO R34
Split Fire Coil Packs are known to be some of the industry leading plug and play style coilpacks and suit applications up to 700hp at the wheels co...
View full detailsLink ECU - Boost Control Solenoid - 3 Port (3BCS)
More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Regular - CLTE20)
Part Number: MSTS-2P-CLT-SS-E20 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Clo...
View full detailsHaltech - Coolant Temp Sensor - Small Thread Thread: M12 x 1.5
Coolant Temp Sensor - Small Thread M12 x 1.5. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: HT-010300
Haltech - 3 Bar Motorsport MAP Sensor
Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...
View full detailsHaltech - WB1 NTK Single Channel CAN O2 Wideband Controller Kit
Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick S...
View full detailsHaltech - TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B
TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B SUITS: Elite Series or Platinum Series ECU's INCLUDES: Ei...
View full detailsSyltech - 8AN Universal 2 Wire Sensor Idle Air Control Valve
**LEAD TIME OF APPROXIMATELY 8 WEEKS** Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application usi...
View full detailsSyltech - MSPP 4 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A04-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSCS 10 BAR GAUGE Pressure & Temperature Sensor
Part Number: MSCS-4P-G10-N8 Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Exposed Glass Tip - LAT G25)
Part Number: MSTS-2P-LAT-SS-G25 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Post Cooler Exposed Glass Tip - LAT G15)
Part Number: MSTS-2P-LAT-SS-G15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsSyltech - MSTS Series Fast Response Air Temp Sensor (Regular Caged Tip - IAT E15)
Part Number: MSTS-2P-IAT-SS-E15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Ope...
View full detailsHaltech - 250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
Haltech 250 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this...
View full detailsHaltech - Air Temp Sensor Thread: 1/8 NPT
Air Temp Sensor - 1/8 NPT Thread, Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part number:...
View full detailsHaltech - Air Temp Sensor - Small Thread Thread: M14 x 1.5
Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010200
Haltech - Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male
Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030
Haltech - DC Motor Driver - DCMD
Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...
View full detailsLink ECU - Ethanol Content Sensor (ECS)
Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...
View full detailsLink ECU - Air Temperature Sensor (IATB)
Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
Link ECU - Mounting Boss (IAT1-8MA)
Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sens...
View full detailsLink ECU - Link 4 Bar MAP Sensor (MAP4)
The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...
View full detailsPlatinum Racing Products - Nissan ABS Hub Sensor Adaptor Mount
These billet wheel speed sensor adaptors are specifically designed to mount aftermarket Bosch Motorsport abs / active wheel speed sensors for highe...
View full detailsGKtech - Radiator Hose Coolant Sensor Adaptor to suit R32 / R33 / R34
DESCRIPTION When installing an aftermarket coolant temp gauge or setting up a header/bleeder tank you'll need to tap into the return on your radi...
View full detailsHaltech - WB2 - Dual Channel CAN O2 Wideband Controller Kit
WB2 - Dual Channel CAN O2 Wideband Controller Kit, Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted i...
View full detailsHaltech - NTK Wideband Hardware Pack | HT-010747
NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes: 1 x NTK LZA08-H5 Sensor ...
View full detailsPowerTune Digital - GPS Upgrade
GPS Upgrade. Upgrades non GPS unit to GPS unit.
Raceworks - Billet Boost Solenoid Mount / Bracket - ALY-163BK
Raceworks 3 Port Boost Solenoid Billet Mounting Bracket. Raceworks have a range of fittings and accessories to assist with mounting sensors, thrott...
View full detailsJMA Automotive - Tail-Shaft Speed Sensor Kit
JMA Automotive billet tail-shaft speed sensor kit to suit R32,33,34 Skyline GTR / GTS4. Tried and test on multiple Skyline GTRs around Australi...
View full detailsSyltech - MSPP 5BAR (72.5PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G05-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Low Clearance Stub Tip - CST E20)
Part Number: MSTS-2P-CST-SS-E20 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Clo...
View full detailsHaltech - 500 PSI "TI" Pressure Sensor Thread: 1/8 NPT
Haltech 500 PSI "TI" Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " ...
View full detailsHaltech - TMS-4 Tyre Monitoring System External Sensors
TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...
View full details