Sensors and Solenoids

After the successful stainless DTM temp sensors & precision pressure & MAP sensors, Syltech has graced us with their new Pressure + Temper...

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on ...

Genuine Nissan Mechanical Speedometer Drive to suit Nissan Skyline R33 / R34 Turbo 5-speed Gearboxes RWD ONLY. This is a custom kit put together by...

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.Part Numbers: HT-011000 - Flex Fuel Sensor H...

Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Do...

Open Element “Fast Response” IAT Temp Sensor, 1/8" NPT, -30 to 150degC Closed Element Fluid Temp Sensor, 1/8" NPT, -30 to 200degC Unlike others on ...

Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins  

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: MSPP-3P-G10-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...

Bosch 145 PSI Fluid Pressure and Temperature SensorThread: M10 x 1.0Please take care when wiring this sensor as incorrect wiring will damage this s...

Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...

Coolant Temp Sensor - Small Thread M12 x 1.5. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: HT-010300

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Part Number: MSCS-4P-G10-N8 Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 Description: Deutsch DTM Connector Stainless Construction...

Part Number: MSTS-2P-CLT-SS-E20 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Clo...

Part Number: MSTS-2P-IAT-SS-E15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Ope...

Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick S...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B SUITS: Elite Series or Platinum Series ECU's INCLUDES:  Ei...

**LEAD TIME OF APPROXIMATELY 8 WEEKS** Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application usi...

Part Number: MSPP-3P-A04-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...

Part Number: MSTS-2P-LAT-SS-G25 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...

Part Number: MSTS-2P-LAT-SS-G15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...

Haltech 250 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this...

Air Temp Sensor - 1/8 NPT Thread, Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part number:...

Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010200

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a f...

Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)

Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sens...

The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...

WB2 - Dual Channel CAN O2 Wideband Controller Kit, Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted i...

PRP RB30 Single Cam dizzy block off. Your performance built RB30 engine probably doesn’t need its distributor and leads, instead of using an ugly W...

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes:  1 x NTK LZA08-H5 Sensor ...

Raceworks 3 Port Boost Solenoid Billet Mounting Bracket. Raceworks have a range of fittings and accessories to assist with mounting sensors, thrott...

Part Number: MSPP-3P-G05-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...

Part Number: MSTS-2P-CST-SS-E20 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Clo...

Haltech 500 PSI "TI" Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " ...

Haltech150 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this ...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100