Sensors and Solenoids
Haltech - Knock Sensor - Genuine Bosch
Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100
Haltech - Oil Temperature sensor High Range Thread: 1/8 NPT 27TPI
Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306
Haltech - Air Temp Sensor Thread: 1/4 NPT
Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX. Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 d...
View full detailsHaltech - Pressure Sensor Extension Kit Length: 450mm (18")
Pressure Sensor Extension Kit. Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8t...
View full detailsHaltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...
View full detailsHaltech - Fuel Level Sender Signal Conditioner
Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...
View full detailsHaltech - Tacho Output Adaptor
Tacho Output Adaptor.Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO o...
View full detailsLink ECU - Boost Control Solenoid - 4 Port (4BCS)
Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...
View full detailsLink ECU - Pressure Sensor (PS150)
Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...
View full detailsLink ECU - Mounting Boss (IAT1-8MS)
Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors ...
View full detailsSyltech sensors - Motorsport Precision Map/Pressure Sensor
Welcome to the Syltech 3,5 and 10 bar map sensor series is aimed at the higher end of the aftermarket automotive scene offering Fluid and MAP press...
View full detailsPlazmaman - Universal Throttle Position Sensor
This is a Quality Universal Throttle Position Sensor to suit our entire range of billet throttle bodies. These sensors are made in Europe, ensuri...
View full detailsTurbosmart - 4 Port Boost Solenoid Kit
PART NUMBER: TS-0301-2003Solenoid (4 Port) Suit Turbosmart Boost Controllers (e-Boost2 and e-Boost Street). Upgrades for Turbosmart eBoost2 and eB...
View full detailsTurbosmart - 3 Port Boost Solenoid Kit
Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a br...
View full detailsExhaust Gas Temperature Probe (EGT) | 101-0146
Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...
View full detailsPrecision Turbo & Engine - Compressor Wheel Speed Sensor
Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...
View full detailsBosch - DF11S Wheel Speed Sensor
Description - DF11s Hall effect principle- Suitable for Wheelspeed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with ABS...
View full detailsSyltech - MSTS Series Glass Fast Response IAT (Pre Cooler Exposed Glass Tip w/ Flyleads - LAT G25)
Part Number: MSTS-FL-LAT-SS-G25 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSPP 35BAR (507.6PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G35-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 135BAR (1958PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G135-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Constructio...
View full detailsSyltech - MSPP 3 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A03-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 5 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A05-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSCS 5 BAR ABSOLUTE (MAP) Pressure & Fast Response Temperature Sensor
Part Number: MSCS-4P-A05-N8 Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Post Cooler Exposed Glass Tip w/ Flyleads - EAT G15)
Part Number: MSTS-FL-LAT-SS-G15 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Shallow Position Exposed Glass Tip w/ Flyleads - EAT G25)
Part Number: MSTS-FL-EAT-SS-G25 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Shallow Position Exposed Glass Tip - EAT G25)
Part Number: MSTS-2P-EAT-SS-G25 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Post Cooler Shallow Position Exposed Glass Tip w/ Flyleads - EAT G15)
Part Number: MSTS-FL-EAT-SS-G15 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response IAT - Post Cooler (Shallow Position Exposed Glass Tip - EAT G15)
Part Number: MSTS-2P-EAT-SS-G15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Low Clearance Stub Tip w/ Flyleads - CST E20)
Part Number: MSTS-FL-CST-SS-E20 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Regular w/ Flyleads - CLT E20)
Part Number: MSTS-FL-CLT-SS-E20 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set...
View full detailsSyltech - MSTS Series Fast Response Air Temp Sensor (Regular Caged Tip w/ Flyleads - IAT E15)
Part Number: MSTS-FL-IAT-SS-E15 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set...
View full detailsMoTec - Pro Series Bottom Trigger Sensor
MoTeC 'hall effect' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the crankshaft position onlySee our ...
View full detailsMoTec - Pro Series Top Trigger Sensor
MoTeC 'reluctor' type sensor used in all Platinum Racing Products Pro Series Trigger Kits*Sensor is use for the camshaft position onlySee our other...
View full detailsHaltech - Bosch 4000psi Fluid Pressure and Temperature Sensor Thread: M10 x 1.0
Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...
View full detailsHaltech - 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
Haltech150 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this ...
View full detailsHaltech - 2000 PSI Brake/Nitrous Pressure Sensor Thread: 1/8 NPT
Haltech - 2000 PSI Brake/Nitrous Pressure SensorThread: 1/8 NPT Includes: Matching Delphi plug and 3 pins.Part number: HT-010908CRITICAL INFORMATIO...
View full detailsHaltech - TMS-4 Tyre Monitoring System Internal Sensors
TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...
View full detailsHaltech - Throttle Position Sensor - Grey CW
Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...
View full detailsHaltech - Throttle Position Sensor - Black CCW
Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...
View full detailsHaltech - Throttle Position Sensor - Motorsport Contactless
Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...
View full detailsHaltech - Laser Ride Height Sensor
Laser Ride Height SensorLength: 25mm (1") to 500mm (19.5") Range. Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deuts...
View full detailsHaltech - Coolant Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI
Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...
View full detailsHaltech - Coolant Temp Sensor Thread: 1/8 NPT 27TPI
Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...
View full detailsHaltech - Air Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI
Air Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010202
Haltech - Plug and Pins Only - Flex Fuel Composition Sensor
Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001
Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...
View full detailsHaltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...
View full detailsHaltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT
Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...
View full details