Engine Management and Accessories

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on ...

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

SKU: 101-0197 Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the E...

SUITS: For use with up to three CAN devices. INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12") NOTES: Direct Plug...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

We have developed a complete DBW kit to swap out that cable old throttle and laggy throttle pedal in your Nissan R Chassis to install new electroni...

Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins  

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...

  Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3"). Part Number: HT-130040

ETS Pro PLUS Nissan Skyline GTR Center Differential ATTESA Torque Split Controller for R32 R33 R34 with wheel speed sensor inputs on their dedicate...

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Recept...

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Rugged 8 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button a...

Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick S...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B SUITS: Elite Series or Platinum Series ECU's INCLUDES:  Ei...

Part Number: HT-130048 Use this cord to connect CAN Items such as IC-7, Widebands and more to your 5pin Link G4X ECU.  Suits: Haltech IC-7 Dash, WB...

**LEAD TIME OF APPROXIMATELY 8 WEEKS** Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application usi...

Please choose from the three options in the dropdown menu!As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port,...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button ...

WB2 - Dual Channel CAN O2 Wideband Controller Kit, Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted i...

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes:  1 x NTK LZA08-H5 Sensor ...

Bundle - Includes 1 x Razor PDM and 1 x 12 Button CAN Keypad.Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Mod...

Please choose from the three options in the dropdown menu!As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port,...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014).Part num...

Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you i...

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.