Products

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...

Laser Ride Height SensorLength: 25mm (1") to 500mm (19.5") Range. Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deuts...

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...

Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...

Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306

Coolant Temp Sensor - Small Thread M12 x 1.5. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: HT-010300

Air Temp Sensor - 1/8 NPT Thread, Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part number:...

Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX. Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 d...

Air Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010202

Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010200

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030

Pressure Sensor Extension Kit. Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8t...

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Nissan Attesa 4WD TPS Adaptor. Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Linear Position Sensor - 1/2" - comes in a range of 100mm/150mm/200mm/250mm.Full list below:1. HT-011211 100mm Travel Length: Between Mounting Hole...

Linear Position Sensor - 1/2" - comes in a range of 5omm/100mm/150mm/200mm/250mm.Full list below:1. HT-011201 50mm Travel Length: Between Mounting ...

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

The Turbosmart Modular Reference Manifold, is an expandable, professional solution for remote mounting and sharing of engine (MAP) reference ...

The Turbosmart Modular Combo (Reference & Sensor) Manifold, is an expandable, professional solution for remote mounting expensive and delic...

The Turbosmart Modular Remote Sensor Manifold, is an expandable, professional solution for remote mounting expensive and delicate sensors away fr...

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...