Products

This is a spline drive upgrade kit suitable ONLY for the billet RB oil pump only. For OEM spline pump gears, check out our other listings. If you a...

With over a decade of racing experience using the Nissan RB engine platform PRP team has developed a bolt in solution that remedies the weakest lin...

Nissan RB Billet Oil Pump Blanking Plate A replacement billet oil pump cover for Nissan RB engines for use when converting to a dry sump setup. Thi...

Nissan RB Oil to Water Heat Exchange Delete Key Features: Save weight & simplify your RB cooling system Manufactured from aerospace grade alum...

This 'V1' Aeroflow 8-litre extended and baffled sump pan suits RB20, RB25 and RB30 engines and was fitted to a display engine, was never fitted to ...

RB26 Cam Covers, missing backing plate however you could use a RB25 unit and trim the corners to suit. This 4 piece set is ready for a sandblast an...

RB26 Cam Covers, missing backing plate however you could use a RB25 unit and trim the corners to suit. This 4 piece set is ready for a sandblast an...

RB26 Cam Covers, complete with backing plate. This 5 piece set is ready for a sandblast and paint in your chosen colour! **DOES NOT COME WITH HKS O...

RB20 Finned Cam Covers, these have been powdercoated in a custom Grey with rainbow flake (very subtle). The powder coat is in immaculate condition ...

RB20 Finned Cam Covers, these have been powdercoated in a custom Grey with rainbow flake (very subtle). The powder coat is in immaculate condition ...

RB25 NEO Cam Covers. Will fit ANY RB Twin Cam engine such as RB20 / RB25 / RB25 NEO and RB26. PLEASE NOTE: ITEMS ARE IN USED CONDITION AND ARE SOLD...

Flat set of RB20 Cam Covers, these are a great way to get that sleek look in your engine bay for your RB twin cam engine without buying Hypertune o...

Genuine Nissan Skyline Oil Camshaft / Crankshaft Seal to suit: R32 GTR / GTSt / GTS R33 GTR / GTSt / GTS R34 GTR / GTt / GT RB20 RB25 RB25NEO RB2...

The Aeroflow Performance oil pan stud kit is designed for use with our Aeroflow oil pan for the Nissan RB20, RB25 and RB30 rear wheel drive models ...

This 'V2' Aeroflow 8-litre extended and baffled sump pan suits RB20, RB25 and RB30 engines and now comes with trap doors and a revised design! It a...

Turbosmart ProOPR is a rising rate oil pressure regulator for your turbocharger. The ProOPR is boost referenced, not unlike your fuel pressure re...

Platinum Racing Products is proud to announce our revolutionary RB Slimline 2WD Dry sump! Fits the following engine blocks: RB20 RB25 RB26 RB30 W...

Introducing the Platinum Racing Products Dry Sump Pump Pulleys! As you would expect from PRP we have put some smarts into our new gears and have a...

Platinum Racing Products is proud to announce our revolutionary RB Slimline 2WD Dry sump! Fits the following engine blocks: RB20 RB25 RB26 RB30 W...

Genuine Nissan Skyline Oil Cap Seal to suit: R32 GTR / GTSt / GTS R33 GTR / GTSt / GTS R34 GTR / GTt / GT Part Number: 15270-D0103  

CRITICAL INFORMATION: OEM AND NISMO OIL CAPS WILL NOT SUIT!  YOU MUST USE EITHER A PRP OIL CAP OR OUR TSS BILLET OIL CAPS (THE HOTTEST OIL CAPS GUA...

Accessories can be purchased individually by clicking HERE! Introducing the Platinum Racing Products Integrated 4WD Dry Sump Kit! We have undertake...

CRITICAL OPERATION NOTICE: Ensure proper installation depth to maintain continuous oil flow to the engine bearings. RB Oil gallery threaded bungs a...

Dailey Engineering offers oil pump driven pulleys utilizing a taper grip locking mechanism.  These hub adaptors allow the fitment of the Dailey ran...

Dailey Engineering offers oil pump driven pulleys utilizing a taper grip locking mechanism.  Our taper lock pulleys eliminate the need for set scre...

These fittings are designed specifically to go along side our Platinum Racing Products billet cam covers to block off the breather ports if need be...

Enhance the appearance of your factory RB covers with our custom low-profile oil filler block off, providing the sought-after dry sump cover aesthe...

Platinum Racing Products is excited to announce the launch of our integrated RB 4WD Dry Sump system. We have embarked on this ambitious project to ...

PLEASE NOTE: This listing only includes our dry sump pan and scavenge baffle plate. If you are looking for our complete kit please see it listed HE...

This dry sump hub drive belt is designed to work with the PRP dry sump kits which you can find by clicking HERE!

Made in collaboration with Platinum Racing Products, this pump is designed to work with the PRP dry sump kits which you can find by clicking HERE!

Accessories can be purchased individually by clicking HERE! Introducing the Platinum Racing Products Integrated 2WD Dry Sump Kit  We have undertake...

**Nissan RB N1 Billet Steel Backing Plate** An absolute must when building any RB engine, coupled with our billet oil pump gears which you can find...

**PLEASE ALLOW AN ETA OF 8-12 WEEKS FOR MANUFACTURE****ALL AT-PERFORMANCE ITEMS ARE A CUSTOM "MADE TO ORDER" PRODUCT** Treat your R34 GT / GTT Skyl...

**PLEASE ALLOW AN ETA OF 8-12 WEEKS FOR MANUFACTURE****ALL AT-PERFORMANCE ITEMS ARE A CUSTOM "MADE TO ORDER" PRODUCT**Treat your R33 GTS / GTST Sky...

**PLEASE ALLOW AN ETA OF 8-12 WEEKS FOR MANUFACTURE****ALL AT-PERFORMANCE ITEMS ARE A CUSTOM "MADE TO ORDER" PRODUCT**Treat your R32 GTS / GTST Sky...

**PLEASE ALLOW AN ETA OF 8-12 WEEKS FOR MANUFACTURE****ALL AT-PERFORMANCE ITEMS ARE A CUSTOM "MADE TO ORDER" PRODUCT**Treat your R32 GTS / GTST / G...

**PLEASE ALLOW AN ETA OF 8-12 WEEKS FOR MANUFACTURE****ALL AT-PERFORMANCE ITEMS ARE A CUSTOM "MADE TO ORDER" PRODUCT**Treat your R32 GTS / GTST / G...

These fittings enable you to run an external oil feed into the oil pump, enabling you to enjoy the benefits of greater oil delivery into the pump. ...

Nitto RB Oil Pump Alignment Tools are ergonomically friendly, aesthetically appealing and functionally perfect. Precision CNC Machined, they are su...

NOTE: PLEASE ENSURE YOU LUBE THE O-RINGS OTHERWISE YOU WILL NOT BE ABLE TO ADJUST YOUR COIN LOGO ONCE PRESSED IN. TSS Billet Oil Filler Cap for the...

*IMAGE FOR REFERENCE ONLY* Replacement Stainless Steel 44 micron Filter Elemenet, Suitable for OPR Turbosmart Oil Pressure Regulators, Turboc...

*IMAGE FOR REFERENCE ONLY* Billet Mounting Bracket to suit Turbosmart Oil Pressure Regulator (V2).

  *IMAGE FOR REFERENCE ONLY*Rebuild and Service Kit to Suit Turbosmart Oil Pressure Regulator (v2) including filter and O-rings.

Turbosmart’s ALL NEW from 2022 OPR V2 Turbocharger Oil Pressure Regulator provides rock solid oil pressure for your turbocharger from a simple,...

Dipstick block off bung Billet alloy interference fit bung designed for use when running a dry sump setup on all RB motors when the conventional di...