Wiring Looms and Adapters

SKU: 101-0197 Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket on the E...

Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, ...

RB TWIN CAM COIL LOOM to suit the VR38 coilpacks from Nissan R35 GTRRB HARNESS FLOW CHART R32 ALL VARIANTS - RBLOOM1 - 6pin igniter delete big 3p...

PRP is now stocking injector harnesses to suit all your 6 cylinder custom fuel rail needs! Made with high temp MIL standard ETFE coated wires, allo...

Haltech Elite CAN Cable DTM-4 to DTM-4 1200mm (48") Part number: HT-130025

This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the facto...

Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older ...

Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes Female Housing (Recept...

Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X St...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

HARNESS OVERVIEW: The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wire...

2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s. Specs DTM4 Female to DTM4 Male. Incl...

Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separ...

*THIS LISTING IS FOR ONE CONNECTOR - PLEASE CHOOSE YOUR QUANTITY FROM THE DROPDOWN* Racewoorks Injector Plug/Connector and Pins + Boot to suit our ...

Harness Sleeve Pack. Includes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x ...

Harness Overview: The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires ...

Elite PRO Direct Plug-in / IC-7 Auxilary Connector kit.Size: 300mm 12" Suits: Elite Pro Plug-in ECU's IC-7 Display Dash Includes: Terminated Har...

Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU.   Compatible...

CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices. Specs DTM4 Female to...

TO MAKE YOUR OWN CUSTOM HARNESS, PLEASE CHOOSE FROM THE FOLLOWING PRP CONNECTOR OPTIONS: 1. PRP 'Push To Seat' Connectors - CLICK HERE 2. PRP 'Pu...

PART NUMBER: HT-182200 HARNESS OVERVIEW Ideal for modified street cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has ...

Connector Kit to suit Bosch DBW Pedal Assembly 1 x Connector Flylead Suits: Bosch DBW 68mm/74mm/82mm Throttlebody Assembly

This Custom Made universal wiring loom by Platinum Racing Products is designed to work with 6 cylinder engine using VR38 coils from the Nissan GTR ...

Set of 6 Racewoorks Injector Plugs/pins to suit oval injectors, part number CPS023. Raceworks offer a comprehensive range of connector adapters, ex...

HARNESS OVERVIEW: The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wir...

The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this Plug and ...

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only Length: 2.5m (8') Suits: CAN ID - Box A or B Part Number: HT-049902

Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 Dash to display the data obtained from the vehicles OBD II system in real time. Length:...

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU's Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs...

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech. Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes:...

Extension Cable for Haltech Multi-Function CAN Gauge.Length: 150cm (5') Part number: HT-061012

GaugeART CAN OLED Gauge - Daisy-chain cable (41-001.11) Part number: HT-061011

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ E...

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ E...

Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.

Deutsch 3 Way Plug Kit

Blanking plugs for unused terminal positions - 10 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Bosch 3 Way Plug Kit