Sensors and Solenoids
Haltech - Air Temp Sensor Thread: 1/8 NPT
Air Temp Sensor - 1/8 NPT Thread, Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part number:...
View full detailsHaltech - Air Temp Sensor - Small Thread Thread: M14 x 1.5
Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010200
Haltech - Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male
Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030
Haltech - Nissan Attesa 4WD TPS Adaptor
Nissan Attesa 4WD TPS Adaptor. Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...
View full detailsLink ECU - Air Temperature Sensor (IATB)
Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
Link ECU - Mounting Boss (IAT1-8MA)
Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sens...
View full detailsLink ECU - Link 4 Bar MAP Sensor (MAP4)
The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to ...
View full detailsPlatinum Racing Products - Nissan ABS Hub Sensor Adaptor Mount
These billet wheel speed sensor adaptors are specifically designed to mount aftermarket Bosch Motorsport abs / active wheel speed sensors for highe...
View full detailsTurbosmart - Fuel Cut Defender FCD-1
Part Number: TS-0303-1001 The Turbosmart Manual Fuel Cut Defener (FCD-1) allows for an accurate increase in the factory fuel cut-out level without ...
View full detailsHaltech - Onboard Wideband Bosch LSU 4.9 Sensor Kit for Nexus Series and Elite PRO Plug-in ECUs | HT-010740
Suits: Nexus Series VCU's with internal onboard wideband. Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only. Includes: 4.9LSU O2...
View full detailsHaltech - NTK Wideband Hardware Pack | HT-010747
NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes: 1 x NTK LZA08-H5 Sensor ...
View full detailsPowerTune Digital - GPS Upgrade
GPS Upgrade. Upgrades non GPS unit to GPS unit.
Raceworks - Billet Boost Solenoid Mount / Bracket - ALY-163BK
Raceworks 3 Port Boost Solenoid Billet Mounting Bracket. Raceworks have a range of fittings and accessories to assist with mounting sensors, thrott...
View full detailsSyltech - MSTS Series Glass Fast Response IAT (Pre Cooler Exposed Glass Tip w/ Flyleads - LAT G25)
Part Number: MSTS-FL-LAT-SS-G25 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Post Cooler Exposed Glass Tip w/ Flyleads - EAT G15)
Part Number: MSTS-FL-LAT-SS-G15 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Low Clearance Stub Tip - CST E20)
Part Number: MSTS-2P-CST-SS-E20 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 Description: Deutsch DTM Connector/Flylead Option Clo...
View full detailsSyltech - MSTS Series Fluid Temp Sensor (Regular w/ Flyleads - CLT E20)
Part Number: MSTS-FL-CLT-SS-E20 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths Optioned DTM Connector Set...
View full detailsHaltech - 500 PSI "TI" Pressure Sensor Thread: 1/8 NPT
Haltech 500 PSI "TI" Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " ...
View full detailsHaltech - 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor Thread: 1/8 NPT
Haltech150 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this ...
View full detailsHaltech - 2000 PSI Brake/Nitrous Pressure Sensor Thread: 1/8 NPT
Haltech - 2000 PSI Brake/Nitrous Pressure SensorThread: 1/8 NPT Includes: Matching Delphi plug and 3 pins.Part number: HT-010908CRITICAL INFORMATIO...
View full detailsHaltech - Knock Sensor - Genuine Bosch
Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100
Haltech - Laser Ride Height Sensor
Laser Ride Height SensorLength: 25mm (1") to 500mm (19.5") Range. Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deuts...
View full detailsHaltech - Oil Temperature sensor High Range Thread: 1/8 NPT 27TPI
Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306
Haltech - Air Temp Sensor Thread: 1/4 NPT
Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX. Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 d...
View full detailsHaltech - Air Temp Sensor - Large Thread Thread: 3/8 NPT 18TPI
Air Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010202
Haltech - Pressure Sensor Extension Kit Length: 450mm (18")
Pressure Sensor Extension Kit. Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8t...
View full detailsHaltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT
Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...
View full detailsHaltech - 3 Bar GM MAP Sensor
Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...
View full detailsLink ECU - Boost Control Solenoid - 4 Port (4BCS)
Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...
View full detailsLink ECU - Adapter M10 x 1 Female to 1/8 BSP Male
Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.
Link ECU - Throttle Position Sensor (TPSCW/CCW)
Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...
View full detailsLink ECU - Pressure Sensor (PS150)
Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...
View full detailsLink ECU - Mounting Boss (IAT1-8MS)
Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors ...
View full detailsLink ECU - KnockBlock G4+ (KNB)
The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mech...
View full detailsLink ECU - AIM GPS09 Module for AIM Dashes
Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...
View full detailsSyltech sensors - Motorsport Precision Map/Pressure Sensor
Welcome to the Syltech 3,5 and 10 bar map sensor series is aimed at the higher end of the aftermarket automotive scene offering Fluid and MAP press...
View full detailsSyltech - Temperature & Pressure Combo Sensor M10x1 -40 to 140degC, 10BAR Gauge
Bosch - Motorsport Temperature & Pressure Combo Sensor M10x1 -40 to 140degC, 10BAR Gauge Supplied Trapezoid Connector Syltech Datasheet
Turbosmart - 4 Port Boost Solenoid Kit
PART NUMBER: TS-0301-2003Solenoid (4 Port) Suit Turbosmart Boost Controllers (e-Boost2 and e-Boost Street). Upgrades for Turbosmart eBoost2 and eB...
View full detailsTurbosmart - 3 Port Boost Solenoid Kit
Control the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a br...
View full detailsExhaust Gas Temperature Probe (EGT) | 101-0146
Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...
View full detailsPrecision Turbo & Engine - Compressor Wheel Speed Sensor
Precision compressor wheel speed sensor kit inc sensor & connector kitTurbo Speed sensors are critical in accurately identifying how fast the t...
View full detailsBosch - DF11S Wheel Speed Sensor
Description - DF11s Hall effect principle- Suitable for Wheelspeed measurement- Light weight, Compact size- Tyco 2-pin connector- For use with ABS...
View full detailsSyltech - MSPP 35BAR (507.6PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G35-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 135BAR (1958PSI) GAUGE Precision Pressure Sensor
Part Number: MSPP-3P-G135-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Constructio...
View full detailsSyltech - MSPP 3 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A03-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSPP 5 BAR ABSOLUTE (MAP) Precision Pressure Sensor
Part Number: MSPP-3P-A05-N8 Includes: Optioned Mating Connector: DTM06-3S / DTM06-3S-E007 Description: Deutsch DTM Connector Stainless Construction...
View full detailsSyltech - MSCS 5 BAR ABSOLUTE (MAP) Pressure & Fast Response Temperature Sensor
Part Number: MSCS-4P-A05-N8 Includes: Optioned Mating Connector: DTM06-4S / DTM06-4S-E007 w/ PVC Protection Cap (Protect glass element in transport...
View full detailsSyltech - MSTS Series Glass Fast Response Air Temp Sensor (Pre Cooler Shallow Position Exposed Glass Tip w/ Flyleads - EAT G25)
Part Number: MSTS-FL-EAT-SS-G25 Includes: ~11" of pretwisted 22awg Tefzel flyleads with recovered DR25 & SCL lengths, w/ PVC Protection Cap Opt...
View full details