Products by Brand

Genuine Momo Steering Wheel - suits refurbishment, removed from R33 Skyline with HKB Boss Kit. *ITEM IS IN USED CONDITION AND ITEM IS SOLD AS IS*

Rear Bumper Reinforcement Bar with Mounting Hardware to suite Nissan Skyline R33 GTS / GTST - In excellent condition. Please Note: Item is in used ...

Interior Light Switch MIDDLE to suite Nissan Skyline R33 GTS GTST GTS4 GTR Coupe Models - has aftermarket LED bulb fitted. *ITEM IS IN USED CONDITI...

Interior Light Switch FRONT to suite Nissan Skyline R33 GTS GTST GTS4 GTR Coupe Models. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Windscreen Wiper Relay to suit Nissan Skyline R33 GTS / GTST. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Rear Seat Piece (Back Support) to suit Nissan Skyline R33 GTS / GTST Coupe Series 2 - Sun fade on headrest areas - suit retrim or not fussy person....

Green Label Air Flow Metre to suit Nissan Skyline R33 GTS / GTST with RB25DET Series 1. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

 Ignitor Module Unit to suit Nissan Skyline R33 GTS / GTST Series 1 ONLY. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Driver Side Window Relay Unit to suit Nissan Skyline R33 GTS / GTST Series 2 ONLY. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Brand New Airbag Resistor to suit Nissan Skyline R33 GTS / GTST / GTR and R34 GT / GTT / GTR - these are commonly used when fitting aftermarket ste...

Driver Side Window Arm / Lever Unit to suit Nissan Skyline R33 GTS / GTST / GTR. Please Note: Item is in used condition and is sold as is.

Quartz Digital Clock which sits in the dash fascia panel to suit: Nissan Skyline R33 GTS Nissan Skyline R33 GTST Nissan Skyline R33 GT4 Nissan Sky...

Hazard Switch unit to suit Nissan Skyline R33 GTST and R33 GTR. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Side Mirror Control unit to suit Nissan Skyline R33 GTST and R33 GTR. *ITEM IS IN USED CONDITION AND IS SOLD AS IS*

Intercooler Crossover Pipe to suit Nissan Skyline R33 GTST - used when fitting a front mounted intercooler on Nissan Skyline R33 Models. Please Not...

Brand New Permaseal Turbocharger Gasket Kit, the T3 Gasket was used in an emergency repair, the rest of the gaskets are brand new and is to suit th...

Brand new K.L.S Power Spirit cam gear, came with a vehicle we purchased, in excellent condition and do not appear to be fitted at all as there are ...

OEM Nissan Cam Angle Sensor unit and bracket to suit the following engines: RB20 (DE and DET) RB25 Series 1 (DE and DET) RB25 Series 2 (DE and DET...

Boot and Wing to suit Nissan Skyline R33 GTS / GTST Series 2 - both items have cosmetic marks but no damage, boot appears nice and straight and has...

 Rear Strut Tower Covers to suit Nissan Skyline R33 GTS GTST GTR (may fit R34 models) - These are used to prevent sound, road noise and road grime ...

 Turbosmart In Cabin Single Stage Boost Controller, recommend removing the casing and fitting fresh vacuum line. Appears to be in good working orde...

These wheels were removed from a vehicle that we purchased and do NOT fit R33 correctly as they are 19 x 9.5" and have an offset of +45 which is to...

Second Hand OEM rear boot lid in silver, was removed from Nissan Skyline R33 GTST in relatively good condition and has NO VISIBLE DENTS OR DAMAGE, ...

Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins  

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.Part Numbers: HT-011000 - Flex Fuel Sensor H...

Fuel Pressure Gauge. Suits Turbosmart Fuel Pressure Regulator Series including FPR800, 1200, 2000 and 3000. Fits 1/8 NPT port.

Weld Flange (Inlet) – Suit Turbosmart Pro-Gate50 (50mm) External Wastegates.

Weld Flange (Outlet) – Suit Turbosmart Pro-Gate50 (50mm) External Wastegates.

Replacement Diaphragm for the IWG75 range of actuators. Note: Not suitable for IWG-75 Twin Port or IWG-HP Actuator.

High performance multi layered Silicone hose. Constant temp resistant from -50 to 170 degrees Celsius (-60 to 340 degrees Fahrenheit) and pressure ...

VBand (Inlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

VBand (Inlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

Weld Flange (Inlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

Weld Flange (Outlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

The Turbosmart Premium Quick Release V-Band Coupling Kits are made of 304 stainless steel including a reusable aerospace-grade locking nut with th...

Valve Seat - Suit Turbosmart Pro-Gate50 (50mm) and 50 Pro Gate Lite External Wastegates

Wastegate position sensor caps allow tuners to monitor exact wastegate valve positions and tune accordingly. To suit Turbosmart Gen-V WG60 Power-Ga...

Wastegate position sensor caps allow tuners to monitor exact wastegate valve positions and tune accordingly. To suit Turbosmart Gen-V WG60 Power-Ga...

PRP Nissan RB Twin Cam Engine Pro CAS Bracket With Optional -20AN Head Drain Fittings Our latest creation and evolution to our billet Cas bracket f...

Ever get your keys out of your pocket and see a boring clump of metal? Why not enlighten yourself with one of our PRP Key Rings? Now you can keep ...

Designed for the race enthusiast, this lightweight stunning dash mount has been CNC profiled from billet alloy to suit Motec C125 and C185 Display...