Products by Brand

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector. Part Number: HT-030010

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil. Suits: HT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI ...

Plugs and Pins Only - Suit IGN-1A IGBT Coil with Ignitor. Part number: HT-020115

High Output IGN-1A Inductive Coil with built-in module. Includes: Matching plug and pins. Part number: HT-020114

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...

LS1 Coil with built-in Ignitor Includes: Matching plug and pins. Part number: HT-020102

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Idle Air Control Valve - Bosch BAC/PWM 2 port. Suits: 19mm 3/4") ID hose. Includes: Matching plugs and pins. Notes: 2 Pin connection. Can be used w...

Plugs and Pins Only - Suit Idle Air Motor 2 Screw Style Part number: HT-020307

Plugs and Pins Only - Suit Idle Air Control Motor - Screw-in Part number: HT-020303

Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

High Output CDI Coil - inc Plug & Pins. Includes: Matching Delphi plug and pins. Part number: HT-020132

Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Nissan Attesa 4WD TPS Adaptor. Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Tacho Output Adaptor.Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO o...

Haltech Neoprene Stubbie Cooler (Koozie). Part number: HT-309004

PAGE UP FOR POWER!!! Suits: Anyone who knows what's up Part number: HT-309023

Haltech "Classic" Face Mask Suits: Your face Includes: 1 x Face Mask Part number: HT-309029

Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or f...

Water proof Elite USB Cap Only (Supplied as a pair) Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps. Part number: H...

Crimping tool - Suits DTM Series Solid Contacts. Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Not...

Crimping tool - Suits DT Series Solid Contacts. Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping To...

Crimping tool - Suits DTP Series Solid Contacts. Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool...

Software Resource USB KEY With Lanyard - Custom Includes: 1 USB Key and Lanyard Part number: HT-200102

USB Connection Cable 2m - Haltech Branded Suits: Platinum Sprint, Sport, Pro and Elite range of ECU's Includes: USB A to USB B Cable - 2 meters - U...

Water proof Elite USB Connection Cable 2.4m/8ft Type B, Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Part number: HT...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Nexus PD16 Tube Mount Kit, comes in two sizes so please choose correct size from the dropdown menu. Includes: 1 x Mounting Plate and hardware 2 x T...