Products by Brand

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes:  1 x NTK LZA08-H5 Sensor ...

PD16 PDM Suits: Haltech Nexus or Elite Series ECUs Includes: 1 x Haltech PD16 1 x SurLok 120A Connector Red 1 x USB Key 1 x USB-C Cable 1 x USB-C...

PD16 PDM + Plug and pin Set Suits: Nexus or Elite Series ECUs Includes: Haltech PD16 and Plug and Pin Set to suit Notes: The NEXUS PD16 is Haltechs...

PD16 PDM + Flying Lead Harness (5M) Includes: Haltech PD16 and 5M Flying lead Harness

When purchasing a NEW G4X Plugin ECU, you can add this option to cart for us to perform the DBW "E-Throttle" Upgrade on the board. Requires modific...

Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The DI Driver-4 is a highly configurable, cost...

RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8...

Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator LEDs each. Four additio...

Bundle - Includes 1 x Razor PDM and 1 x 12 Button CAN Keypad.Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Mod...

Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tr...

Bundle - Includes 2 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tradition...

Part Number: HT-130048 Use this cord to connect CAN Items such as IC-7, Widebands and more to your 5pin Link G4X ECU.  Suits: Haltech IC-7 Dash, WB...

Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...

ETS Pro PLUS Nissan Skyline GTR Center Differential ATTESA Torque Split Controller for R32 R33 R34 with wheel speed sensor inputs on their dedicate...

We have developed a complete DBW kit to swap out that cable old throttle and laggy throttle pedal in your Nissan R Chassis to install new electroni...

**LEAD TIME OF APPROXIMATELY 8 WEEKS** Syltech 2 wire sensor Idle Air Control Valve ( IACV ). Allows for remote idle control in any application usi...

  Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3"). Part Number: HT-130040

Please choose from the three options in the dropdown menu!As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port,...

Please choose from the three options in the dropdown menu!As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port,...

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel, yellow ...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014).Part num...

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug ...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

Water proof Elite USB Cap Only (Supplied as a pair) Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps. Part number: H...

Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

Mounting bracket for G4+ Thunder.

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use ...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack