Haltech

Nissan Attesa 4WD TPS Adaptor. Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Do...

Elite PRO Direct Plug-in / IC-7 Auxilary Connector kit.Size: 300mm 12" Suits: Elite Pro Plug-in ECU's IC-7 Display Dash Includes: Terminated Har...

Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306

High Output IGN-1A Inductive Coil with built-in module. Includes: Matching plug and pins. Part number: HT-020114

LS1 Coil with built-in Ignitor Includes: Matching plug and pins. Part number: HT-020102

High Output CDI Coil - inc Plug & Pins. Includes: Matching Delphi plug and pins. Part number: HT-020132

Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Tacho Output Adaptor.Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO o...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014).Part num...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

SUITS: Haltech iC7 Display Dash INCLUDES: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo NOTES:...

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...

Plug and Pins Only - AMP 34 Pin 4 Row 3 Keyway Superseal Connector Suits: Nexus: PD16, Elite 550/750/950 ECUs, Haltech IQ3 Street Dashes and the la...

Haltech Elite CAN Cable DTM-4 to DTM-4 1200mm (48") Part number: HT-130025

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030

Crimping tool - Suits DTM Series Solid Contacts. Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Not...

Crimping tool - Suits DTP Series Solid Contacts. Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool...

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.Part Numbers: HT-011000 - Flex Fuel Sensor H...

Water proof Elite USB Connection Cable 2.4m/8ft Type B, Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Part number: HT...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU's Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs...

Crimping tool - Suits DT Series Solid Contacts. Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping To...

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...

Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...

Coolant Temp Sensor - Small Thread M12 x 1.5. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: HT-010300

Air Temp Sensor - 1/8 NPT Thread, Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part number:...

Air Temp Sensor - 1/4 NPT Thread - Suits Nissan Z32 300ZX. Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 d...

Air Temp Sensor - Large Thread 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010202

Air Temp Sensor - Small Thread M14 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.Part number: HT-010200

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector. Part Number: HT-030010

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

  Haltech CAN Ada Cable DTM-4 F to 8 pin Black Tyco 75mm (3"). Part Number: HT-130040

Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 Dash to display the data obtained from the vehicles OBD II system in real time. Length:...

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Harness Sleeve Pack. Includes: Nylon Sleeve 6mm x 10m 8mm x 5m 14mm x 2m 25mm x 1m Heatshrink glue lined 8mm x 1.2m 12mm x 0.6m 19mm x 0.3m 35mm x ...

Part Number: HT-130048 Use this cord to connect CAN Items such as IC-7, Widebands and more to your 5pin Link G4X ECU.  Suits: Haltech IC-7 Dash, WB...

Plug and Pins Only 16 Pin TYCO. Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 P...

Plug and Pins Only 24 Pin TYCO. Suits: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 Includes: Pack of 24 Pins. Part Number:...

SurLok Connector-120A (Red) - Suits Nexus PD16 Suits: Nexus PD16 Includes: 1 x 120A Red SurLok Connector

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Pressure Sensor Extension Kit. Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8t...

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech. Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes:...

Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or f...