Haltech

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...

Bosch 145 PSI Fluid Pressure and Temperature SensorThread: M10 x 1.0Please take care when wiring this sensor as incorrect wiring will damage this s...

Linear Position Sensor - 1/2" - comes in a range of 100mm/150mm/200mm/250mm.Full list below:1. HT-011211 100mm Travel Length: Between Mounting Hole...

Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only Length: 2.5m (8') Suits: CAN ID - Box A or B Part Number: HT-049902

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins  

Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...

HC5 Hydraulic Crimper 5 TON. Suits: 00 AWG to 12AWG cable. Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,2...

SUITS: For use with up to three CAN devices. INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12") NOTES: Direct Plug...

Nexus PD16 Tube Mount Kit, comes in two sizes so please choose correct size from the dropdown menu. Includes: 1 x Mounting Plate and hardware 2 x T...

Linear Position Sensor - 1/2" - comes in a range of 5omm/100mm/150mm/200mm/250mm.Full list below:1. HT-011201 50mm Travel Length: Between Mounting ...

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Do...

Elite PRO Direct Plug-in / IC-7 Auxilary Connector kit.Size: 300mm 12" Suits: Elite Pro Plug-in ECU's IC-7 Display Dash Includes: Terminated Har...

Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306

High Output IGN-1A Inductive Coil with built-in module. Includes: Matching plug and pins. Part number: HT-020114

LS1 Coil with built-in Ignitor Includes: Matching plug and pins. Part number: HT-020102

High Output CDI Coil - inc Plug & Pins. Includes: Matching Delphi plug and pins. Part number: HT-020132

Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Tacho Output Adaptor.Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO o...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014).Part num...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

SUITS: Haltech iC7 Display Dash INCLUDES: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo NOTES:...

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...

Haltech Elite CAN Cable DTM-4 to DTM-4 1200mm (48") Part number: HT-130025

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030

Crimping tool - Suits DTM Series Solid Contacts. Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Not...

Crimping tool - Suits DTP Series Solid Contacts. Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool...

Flex Fuel Composition Sensor Suits: 3/8 "GM Spring Lock" fittings. Includes: Matching plug and 3 pins.Part Numbers: HT-011000 - Flex Fuel Sensor H...

Water proof Elite USB Connection Cable 2.4m/8ft Type B, Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Part number: HT...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...