Haltech

Laser Ride Height SensorLength: 25mm (1") to 500mm (19.5") Range. Outputs: 0-5v Analogue Output. Includes: Connection cable, matching male Deuts...

Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

WB2 - Dual Channel CAN O2 Wideband Controller Kit, Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted i...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B SUITS: Elite Series or Platinum Series ECU's INCLUDES:  Ei...

Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick S...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on ...

Haltech - 2000 PSI Brake/Nitrous Pressure SensorThread: 1/8 NPT Includes: Matching Delphi plug and 3 pins.Part number: HT-010908CRITICAL INFORMATIO...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness. Suits: Nexus Series devices Includes:  1 x NTK LZA08-H5 Sensor ...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Haltech 500 PSI "TI" Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " ...

Haltech 250 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this...

Haltech150 PSI "TI" Fuel/Oil/Wastegate Pressure SensorThread: 1/8 NPTPlease take care when wiring this sensor as incorrect wiring will damage this ...

Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Suits: Nexus Series devices Includes: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness (1.2M), 1 x Weldable Bung Notes: Plug and Play wi...

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Haltech - 4 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...

Bosch 145 PSI Fluid Pressure and Temperature SensorThread: M10 x 1.0Please take care when wiring this sensor as incorrect wiring will damage this s...

Linear Position Sensor - 1/2" - comes in a range of 100mm/150mm/200mm/250mm.Full list below:1. HT-011211 100mm Travel Length: Between Mounting Hole...

Haltech - 3 Bar Motorsport MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sen...

Haltech 3 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Boost Control Solenoid 3 Port. Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-031012) Part number...

Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pins  

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

Linear Position Sensor - 1/2" - comes in a range of 5omm/100mm/150mm/200mm/250mm.Full list below:1. HT-011201 50mm Travel Length: Between Mounting ...

Nissan Attesa 4WD TPS Adaptor. Outputs: Produces the correct scaled TPS output signal required for the MFD and Attesa 4WD functions when using a st...

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

Knock Sensor - Genuine Bosch. Suits: 8mm (5/16") mounting bolt. Includes: Matching plug and 2 pins. Part number: HT-011100

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

SUITS: NA or Forced induction applications. Used with a Requires a TCA 2 or 4 thermocouple amplifier. INCLUDES: Mini K Type connector. NOTES: Do...

Oil Temperature sensor High Range 150°C. Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Part number: HT-010306

Fuel Level Sender Signal Conditioner. Outputs: Filters a resistive signal for use with an Analogue Voltage Input (AVI). Includes: HT-031016 - Match...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

Flex Fuel Fittings 3/8 "GM Spring Lock" to -6AN Male. Suits: GM Flex Fuel Sensors. Includes: Two fittings.Part number: HT-011030