GKtech - Stainless Steel Braided Teflon ABS Delete kit to suit R32 / R33 / R34
DESCRIPTION
The ABS module on the Nissan's of the 90's are renown for being unpredictable, particularly when on track. The GKTECH ABS Delete line kits are an easy bolt-on solution to remove the complete ABS system on your vehicle.
We developed these kits after the frustration in trying to remove the ABS on our own cars. The normal route is to find a car without ABS and swap the master cylinder and all lines in the engine bay, however, these cars are becoming rarer by the day.
Our kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The lines are assembled by us in-house in Australia using quality UK made stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection, which complies with all ADR, DOT and TUV specifications.
- Direct replacement of the standard hard lines
- Cleans up the look of the engine bay
- For race cars only, however, no permanent modifications are required.
***ONLY FITS RIGHT HAND DRIVE***
Vehicle Compatibility:
- Nissan S13 240sx
- Nissan S13 Silvia
- Nissan S14 240SX
- Nissan S15 Silvia
- Nissan Skyline R32 GTS-T
- Nissan Skyline R32 GTR
- Nissan Skyline R32 GTS-4
- Nissan Skyline R33 GTS-T
- Nissan Skyline R33 GTR
- Nissan Skyline R34 GTT
- Nissan Skyline R34 GTR
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
NOTE: T-piece fitting will differ from photos shown here, the photo here is of our original prototype
NOTE #2: Now available for both LHD and RHD vehicles
FAQ'S
Is there anything else that I need to do to remove my ABS? The removal of your ABS with this kit is very simple. Simply remove your standard hard lines, remove your ABS module (unplugs) and then put these lines in their place (can run along the K frame or along the firewall). Install time should take less than 30 minutes.
Are there any negatives to removing the ABS lines/module? Removing ABS for a track driven car is a must and is strongly suggested. ABS modules are known to kick in under hard braking or in the wet unexpectedly.
Will my ABS light show an error? Yep, it sure will. Simply remove the bulb from the dash cluster and you'll be none the wiser, problem solved.
Is it illegal to remove the ABS module on a street driven car? We're not 100% sure but as with most mods, it probably is. If it is illegal then we suggest for race track use only and ABS can be of use sometimes (in traffic, not paying attention, slam on the brakes, avoid a lockup).