Full Catalogue
Kelford Cams - 24 x Shim-less DLC Coated RB26 Cam Followers 6.40mm | KCF-182X
31mm OD. 6.40mm shim. 25mm skirt - 30.35mm Base Circle *Sold as a set of 24* - Suits RB26DETT Kelford Cams DLC Coated Buckets Feature: large...
View full detailsKelford Cams - 24 x ‘Shim-Under’ DLC Coated RB26 Cam Followers 3.78mm | KCF-182
31mm OD. 3.78mm shim. 25mm skirt - 1.42mm-30.35mm base-circle. Suit RB26DETT - Sold as a set of 24. Kelford Cams DLC Coated Buckets Feature: ...
View full detailsKelford Cams - 24 x Shim-less DLC Coated RB26 Cam Followers 6.15mm | KCF-182S
Nissan RB26DETT Shim-Less DLC Coated Cam Followers with 31mm OD. 6.15mm shim. 25mm skirt - 31.42mm base-circle. *Sold as a set of 24*KCF-182S have ...
View full detailsKelford Cams - 24 x ‘Shim-Under’ DLC Coated RB26 Cam Followers 2.78mm | KCF-L-182
31mm OD. 2.78mm shim. 25mm skirt - 32.02mm-32.33mm base-circleNissan RB26DETT Standard Base-circle, Shim under Bucket DLC Coated Cam Follower. Kelf...
View full detailsKelford Cams - VR38DETT Spring Set and Titanium Retainers | KVS38-BT
Nissan R35 GTR / VR38 - Progressivly wound 'Pacaloy' Beehive Valve spring set with titanium retainers. Engineered to match our camshafts for the ul...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-B2
274/274 Degrees advertised duration, 10.60mm/10.55mm lift - Stage 2 high lift cams for street and motorsport applications. Superior performance and...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-C
276/276 Degrees advertised duration, 11.00mm/10.97mm lift - 276/276 Degrees advertised duration, 11.00mm/10.97mm lift. Stage 3 racing cams to suit ...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-E
292/306 Degrees advertised duration, 11.00mm/11.00mm lift - Ultimate race cams for methanol burning pro drag racing motors, 6 second 2000HP+ type b...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-S6
274&266/274 Deg. Advert. Duration 10.60mm&10.55mm/10.55 lift - Split lobe design cams, to promote swirl and maximise efficiency. Suits stre...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-D
284/290 Degrees advertised duration, 10.60mm/10.57mm lift - Serious race cams to suit drag racing engines using E85 or methanol fuel. The lobe desi...
View full detailsKelford Cams - VR38DETT R35 GT-R Camshaft Set | 231-A
266/266 Degrees advertised duration, 10.00mm/9.25mm lift - Stage 1 EZ-Power cams to suit stock engines. Can use O.E.M. valve springs if boost and R...
View full detailsKelford Cams - VR38DETT Drag Racing Spring and Retainer Kit | KVS38-EXTREME
To suit Nissan R35 GTR - VR38 Engine, sold as a set of 24 Springs and 24 Retainers. Intake 130lb @35.5mm (1.398") installed height, 270lb @ 11mm. ...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-B
270/270 Degrees advertised duration, 11.30mm/11.30mm lift - Stage 2 cam to suit slightly modified engines. Requires ECU re-tune. Primary lobe speci...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-HS
296/304 Degrees advertised duration, 13.70mm/13.70mm lift - Solid lifter cam to suit various high RPM racing applications. Suits well built competi...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-IS
304/314 Degrees advertised duration, 13.70mm/13.85mm lift - Solid lifter cam for top end HP. This cam suits well built competition engines with lar...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-G
284/292 Degrees advertised duration, 13.70mm/13.70mm lift - Stage 3 cam to suit well modified street / strip engines. This cam is a great choice fo...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-F
274/274 Degrees advertised duration, 12.95mm/12.95mm lift - Stage 2 cam to suit street / strip applications. Suits 350-500HP turbo range. Good midr...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-A
260/260 Degrees advertised duration, 10.90mm/10.90mm lift - Stage 1 cam to suit stock engine, stock ECU and stock valve springs. Primary lobe speci...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-DS
304/314 Degrees advertised duration, 13.70mm/13.85mm lift - Solid lifter racing cam to suit well modified, high RPM street / strip or track day car...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-CS
290/292 Degrees advertised duration, 12.20mm/12.20mm lift - Solid lifter racing cam to suit street / strip or track day car. Primary lobe specifica...
View full detailsKelford Cams - RB30 (SOHC) Camshaft | 226-E
260/260 Degrees advertised duration, 10.90mm/10.90mm lift. - Stage 1 cam to suit mild turbocharged street performance applications.
Kelford Cams - R32 / R33 GTR RB26 (Mech) Low Lift L182-B
272°/272° | 8.95mm/8.90mm Valve Lift - 272° street/strip performance cams. Suits RB26DETT. More mid-high rpm power. Suits twin turbo upgrade or si...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) Low Lift L182-A
264°/264° | 8.95mm/8.90mm Valve Lift - 264° street performance cams to suit RB26DETT. Good throttle response. Improved low to mid-range power and ...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift | 182-C
272°/272° | 10.00mm/9.95mm Valve Lift. High lift performance camshaft set designed to give more top end and maximum power than the 182-B. Suits twi...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift 182-SG
282°-288°/300° | 11.10mm-11.10mm/11.10mm Valve Lift - 292°/288° split lobe intake, 300° exhaust. High lift drag racing camshafts to suit RB26DETT. ...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift Camshaft Set | 182-S
274°-270°/274° | 10.50mm/10.50mm Valve Lift / Split lobe, high lift camshafts. A good balance between throttle response and high rpm power with a l...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift Camshaft Set | 182-B
260°/260° | 10.00mm/9.95mm Valve Lift. High lift short duration camshaft set, best split between good throttle response and horsepower. Suits twin ...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift 182-SF
288°-280°/292° | 11.10mm-10.55mm/11.10mm Valve Lift - 288°/280° split lobe intake, 292° exhaust. High lift racing camshafts to suit RB26DETT, best ...
View full detailsKelford Cams - R32 / R33 GTR RB26 (Mech) High Lift 182-SE
274°-270°/280° | 10.55mm-10.50mm/10.50mm Valve Lift - 274°/270° split lobe intake, 280° exhaust. High lift racing camshaft set to suit 3.0L+ bottom...
View full detailsKelford Cams - RB26 Beehive Valve Spring Set with Titanium Retainers | KVS1855-BT
105lb seat pressure at 39.10mm installed height. Coil bind at 27.00mm. Suits Nissan RB26DETT. High performance nitrided, nano peened PACALOY beehi...
View full detailsKelford Cams - RB25DET R33 NVCS Valve Spring Set with Titanium Retainers | KVS25R-T
83lb seat pressure at 30.40mm installed height. 10.50mm maximum lift. Nissan RB25DET (with NVCS / VCT) High performance valve springs with Titanium...
View full detailsKelford Cams - RB25DET NVCS R33 Turbo Camshaft Set | 246-A
262°/262° | 9.30mm/9.30mm Valve Lift. Street/drift performance camshafts designed to improve low to mid-range power and fast spool. Ultimate thrott...
View full detailsKelford Cams - RB25DET NVCS R33 Turbo Camshaft Set | 246-A2
262°/272° | 9.30mm/9.35mm Valve Lift. Street/drift/strip cams for more mid-high rpm power. Retains excellent throttle response with NVCS. Suits 58m...
View full detailsKelford Cams - RB25DET NVCS R33 Turbo Camshaft Set | 246-B
264°/272° | 10.00mm/10.00mm Valve Lift. High lift cams for high performance engines. Suits 64mm-76mm turbos. Ideal for high power street/drift or t...
View full detailsKelford Cams - RB25DET NEO Camshaft Set 244-A2
264°/272° | 8.95mm/8.90mm Valve Lift. Street/drift/strip cams for more mid-high rpm power. Retains excellent throttle response with NVCS. Suits 58m...
View full detailsKelford Cams - RB25DET NEO Camshaft Set 244-B
264°/272° | 9.60mm/9.60mm Valve Lift. High lift cams for high performance engines. Suits 64mm+ turbos. Great with a 3L bottom end. Ideal for high p...
View full detailsKelford Cams - RB25DET NEO Camshaft Set 244-A
264°/264° | 8.95mm/8.90mm Valve Lift. Street/drift performance cams designed to improve low to mid-range power and fast spool. Ultimate throttle re...
View full detailsKelford Cams - RB25DET NEO Beehive Spring Set with Titanium Retainers KVS25NEO
This spring set is to suit Nissan RB25DET NEO ONLY. High performance beehive valve spring set with titanium retainers. Ovate PACALOY wire. 100lb s...
View full detailsKelford Cams - RB25DET NEO R34 "Drop-In" Spring to Suit OEM Retainer | KVS25NEO-DI
*97lb seat pressure at 38.65mm installed height. 190lb at 10.00mm lift* This spring set is to suit Nissan RB25DET NEO Engines ONLY. Drop-in parall...
View full detailsKelford Cams - RB20DET / RB25DET *NON VCT* Low Lift Camshafts HL182-C
280°/280° | 9.35mm/9.35mm Valve Lift. Racing camsshafts to suit engines with 64mm-72mm turbos. Best suited to wide open throttle and high rpm power...
View full detailsKelford Cams - RB20DET / RB25DET *NON VCT* Low Lift Camshafts HL182-B
272°/272° | 9.35mm/9.35mm Valve Lift. Drift/strip camshafts for more mid-high rpm power. Suits 58mm-68mm turbo. No cylinder head clearancing needed...
View full detailsKelford Cams - RB20DET / RB25DET *NON VCT* Low Lift Camshaft Set | HL182-A
262°/262° | 9.30mm/9.30mm Valve Lift. Street/drift camshaft for improved low to mid-range power, good throttle response and fast spool. Suits turbo...
View full detailsKelford Cams - RB20DET / RB25DET *NON VCT* High Lift Camshafts H182-SD
278°-272° | 10.00mm/10.00mm Valve LiftSplit lobe design on the inlet. High lift cams for improved port flow and more top end power. Suits 64mm+ tur...
View full detailsKelford Cams - RB20DET / RB25DET *NON VCT* High Lift Camshaft Set | H182-SC
272°-264° | 10.00mm/10.00mm - Valve Lift. Split lobe design on the inlet. Short duration and high lift cams for improved port flow and more top end...
View full detailsKelford Cams - VR38DETT Intake Valve Guide x 12 | VG231-IN-12
Nissan R35 GTR / VR38 Intake Valve Guide 10.03mm O/D 5.95mm I/D. Sold as a set of 12.
Kelford Cams - VR38DETT Exhaust Valve Guide x 12 | VG231-EX-12
Nissan R35 GTR / VR38 Exhaust Valve Guide 10.03mm O/D 5.95mm I/D. Sold as a set of 12.
Kelford Cams - VR38 Intake Valve +1.00mm | F2237P
Nissan R35 GTR - VR38 Intake Valve +1.00mm. Sold as a single unit.
Kelford Cams - VR38 Exhaust Valve +1mm | F2235P
Nissan R35 GTR - VR38 Exhaust Valve +1mm. Sold as a single unit.