Aeroflow - 5455 Boosted Turbocharger with T3 Flange .82 Rear (GTX3071)
Save 10%
Original price
$1,484.86
Original price
$1,484.86
-
Original price
$1,484.86
Original price
$1,484.86
Current price
$1,336.37
$1,336.37
-
$1,336.37
Current price
$1,336.37
**THE ULTIMATE RESPONSE FOR RB20/RB25 STOCK BLOCK ENGINES FOR UP TO 450HP AT THE WHEELS**
BOOSTED 5455 Turbocharger Specifications - AF8005-3001
Recommended horsepower rating: 340-650HP
Recommended engine displacement: 1.8L to 3.0L
- Dual ceramic ball bearing
- Point Milled 7075 billet compressor wheel
- Ported shroud compressor cover
- Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
- External wastegate sold separately
- Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
- T3 single entry turbine inlet flange
- SiMo-nodular cast iron rear housing
- V-Band turbine outlet flange
- M14 x 1.5mm coolant port thread
- 7/16"-24 oil feed fitting thread
- 38mm bolt centre turbo drain flange with M8 x 1.25mm thread size
Compressor Specifications
Inducer: 54mm
Exducer: 71mm
Extended Tip: 73.79mm
A/R: 0.60
Compressor Inlet: 4" Slip fit
Compressor Outlet: 2" Slip fit
Turbine Specifications
Inducer: 60mm
Exducer: 55mm
A/R: 0.82
Turbine Inlet Flange: T3
Turbine Outlet Flange: V-Band (AF8080-1000)
Wastegate
External wastegate
BOOSTED 5455 Turbocharger Specifications - AF8005-3001
Recommended horsepower rating: 340-650HP
Recommended engine displacement: 1.8L to 3.0L
- Dual ceramic ball bearing
- Point Milled 7075 billet compressor wheel
- Ported shroud compressor cover
- Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
- External wastegate sold separately
- Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
- T3 single entry turbine inlet flange
- SiMo-nodular cast iron rear housing
- V-Band turbine outlet flange
- M14 x 1.5mm coolant port thread
- 7/16"-24 oil feed fitting thread
- 38mm bolt centre turbo drain flange with M8 x 1.25mm thread size
Compressor Specifications
Inducer: 54mm
Exducer: 71mm
Extended Tip: 73.79mm
A/R: 0.60
Compressor Inlet: 4" Slip fit
Compressor Outlet: 2" Slip fit
Turbine Specifications
Inducer: 60mm
Exducer: 55mm
A/R: 0.82
Turbine Inlet Flange: T3
Turbine Outlet Flange: V-Band (AF8080-1000)
Wastegate
External wastegate