Engine Management

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

Link ECU CAN Keypad Inserts are used for your CAN keypad, the keypads themselves arrive empty and you are to purchase buttons from these listings.

A premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. N...

TCA-8 (4+4) Eight Channel Thermocouple Amplifier Programmed as TCA-4A and TCA-4B SUITS: Elite Series or Platinum Series ECU's INCLUDES:  Ei...

PART NUMBER: HT-195000 NEXUS R5 VCU ONLY ECU OVERVIEW: NEXUS R5 is the new Haltech flagship product combining the functionality of a power d...

PART NUMBER: HT-195100 NEXUS R5 + Plug and Pin Set ECU OVERVIEW: NEXUS R5 is the new Haltech flagship product combining the functionality of...

PART NUMBER: HT-195200 NEXUS R5 + Universal Wire-in Harness Kit 2.5metre length ECU OVERVIEW: NEXUS R5 is the new Haltech flagship product c...

PART NUMBER: HT-195201 NEXUS R5 + Universal Wire-in Harness Kit 5metre length ECU OVERVIEW: NEXUS R5 is the new Haltech flagship product com...

PART NUMBER: HT-193000  NEXUS R3 VCU ONLY ECU OVERVIEW: If you’ve been looking at the Nexus R5 and thinking it might be a bit of an overkil...

PART NUMBER: HT-193100  NEXUS R3 + Plug and Pin Set ECU OVERVIEW: If you’ve been looking at the Nexus R5 and thinking it might be a bit of ...

PART NUMBER: HT-151358 Elite 2500 plug and play ecu + adaptor kit. SUITS R34 GTT and WC34 ONLY ADAPTOR OVERVIEW: This adaptor plugs directly in...

GPS Upgrade. Upgrades non GPS unit to GPS unit.

**Choose your ECU model from the dropdown menu** Not required when ordering a powertune dash. All PowerTune Digital dashes come with 1 x cable to ...

Proudly presenting the Powertune Digital YES-WE-CAN I/O Extender. Provides up to 8 analogue (voltage OR resistance based) and 8 digital inputs whi...

HARNESS OVERVIEW: Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connector...

HARNESS OVERVIEW: Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connecto...

ECU OVERVIEW: Haltech's Elite 2500 T takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed wat...

Plug and Pins Only AMP 26 & 34 Pin 4 Row 3 Key Superseal Set. ECU OVERVIEW:Elite 2500 is a two-connector, stand-alone ECU ideal for popul...

HARNESS OVERVIEW: The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled w...

Please choose from the three options in the dropdown menu!As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port,...

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel, yellow ...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

Water proof Elite USB Cap Only (Supplied as a pair) Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps. Part number: H...

Features: 10 x High Side Outputs 2 x Half Bridge Outputs 4 x 25A High Current Outputs 8 x Inputs + Dedicated Ignition Switch Input Power for Ign...

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

Mounting bracket for G4+ Thunder.

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use ...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connec...

5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connec...