Black Friday

A must have for any RB engine build, this hybrid-designed headgasket suits the Nissan Skyline RB25,RB25-NEO, RB26 and RB30 Twin Cam engines in eith...

ATI Super Damper SFI Approved Nissan RB26DETT (RB26 R33/34 GTR 917753 1000HP Harmonic Balancer)

ATI Super Damper (External Balance) SFI Approved Nissan RB26DETT (RB26 R32 GTR 917752 1000HP Harmonic Balancer)

Universal 4" (102mm) Clamp-On Stainless Steel Inverted Tapered Pod Filter with Chrome End - PART NUMBER: AF2815-40005" (127mm) High x 6" (153mm) B...

6Boost Exhaust Manifold Stud and Nut Kit to suit RB26 from: R32 GTR R33 GTR R34 GTR These studs are required for any aftermarket manifold as they...

ACL Main Bearing Set Nissan RB26DETT - 7M2428HC-STD

Aeroflow fuel rails have been used in many high hp applications and we are no strangers to that, this fuel rail kit has been used by us for quite a...

Aeroflow 4 inch turbo guard. Protect your turbocharger and engine internals from debris at the track or on the road. These stainless honeycomb turb...

The Aeroflow intercoolers are designed with a tube and fin core which has the highest thermodynamic dissipative process. These universal intercoole...

Complete rubber shifter surround kit replacements which are perfect for worn rubber and rusted plates, also good to use in manual conversion kits. ...

**Also available in raw finish AF4074-2000** Aeroflow Performance have this high amp GM LS alternator. The model design is based off a Holden C...

Replacement Nissan RB Pick-up O-Ring. Suits all RWD Nissan RB oilpickups that require an O-Ringto seal such as: RB20 RB25 RB30 Part Number: AF82...

These Aeroflow Performance welsh plug kits are designed for sealing up the casting core holes in your engine block. The expansion plugs help protec...

Opening Temperature: 71°CSuits most RB engines and plenty other Nissan vehiclesPart Number: AF49-1138 Thermostats play a vital role in engine manag...

12 Point Head, M16 x 1.50mm Thread The Aeroflow harmonic balancer bolt is designed to suit Nissan RB25 and RB30 engines. Manufactured from aircraft...

Suits the following applications: Nissan RB25, RB26, RB30 with aftermarket flywheels ONLY! When installing a new flywheel, it is recommended to...

**1 UNIT AVAILABLE - NEVER TO BE RESTOCKED AGAIN****AVAILABLE IN TEXTURED BLACK ONLY**Treat your R33 GTS / GTST Skyline to this AT Performance Cool...

**ONE UNIT AVAILABLE - NEVER TO BE RESTOCKED AGAIN** **AVAILABLE IN TEXTURED BLACK ONLY** Treat your R34 GT / GTT Skyline to this AT Performance Wa...

**ONLY TWO UNITS AVAILABLE - NEVER TO BE RESTOCKED AGAIN****AVAILABLE IN SATIN BLACK OR BRUSHED ALLOY** Made by AT Performance right here in Austra...

The Turbosmart RacePort is famous for being an amazingly small and light BOV for turbocharged competition-level engines which is why we've teamed u...

Part Number: TS-0563-1762 The StraightGate40 from Turbosmart is the smallest butterfly-style external wastegate for tight engine bay confines and f...

Part Number: TS-0402-1132 Turbosmart Motorsport Proven Billet AN10 Inline Fuel Filter with 10 micron washable stainless steel mesh cartridge.Availa...

Part Number: TS-0402-1130 Turbosmart Motorsport Proven Billet AN6 Inline Fuel Filter with 10 micron washable stainless steel mesh cartridge.Availab...

The Turbosmart FPR6 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles ...

The Turbosmart GenV HyperGate45 external wastegate is a cost effective, high performing 45mm external wastegate. The Gen-V provides extensive use...

These are brand new items leftover from a customers car who did not want them, they have never been used as the already fitted 14psi spring was suf...

Part Number: TS-0203-1072 The Kompact Dual Port Blow Off Valve Set to suit the Nissan Skyline GT-R series, including R32, R33, and R34 (RB26DETT), ...

Turbosmart’s ALL NEW from 2022 OPR V2 Turbocharger Oil Pressure Regulator provides rock solid oil pressure for your turbocharger from a simple,...

Weld Flange (Outlet) – Suit Turbosmart Pro-Gate50 (50mm) External Wastegates.

Weld Flange (Inlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

Weld Flange (Outlet) – Suit Turbosmart Hyper-Gate45 (45mm) External Wastegates.

Part Number: TS-0301-1003 Winner of the Global Press Award at the 2007 SEMA Trade Show, e-Boost2 allows the user to control, monitor, map and compe...

Winner of the Global Press Award at the 2007 SEMA Trade Show, eBoost2 allows the user to control, monitor, map, and compensate for boost. But e-Boo...

Part Number: TS-0101-1002 Smaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable fro...

Part Number: TS-0204-1102 The Race Port is famous for being an amazingly small and light BOV for turbocharged (replace with supercharged for the su...

Part Number: TS-0204-1107 The Race Port is famous for being an amazingly small and light BOV for supercharged competition-level engines. Featuring ...

Part Number: TS-0204-3001 Turbosmart BOV Adapters Other Information: We can supply the full range of Turbosmart, If it is not listed on our page, p...

Part Number: TS-0205-2011 Blanking Plate suit Turbosmart 38mm Weld on straight and profiled adaptors as well as Hose Adaptor fittings. Allows tempo...

Part Number: TS-0203-1261 Turbosmart Shortie Kompact Series valves have been specifically designed to suit BorgWarner EFR and KKK turbos. They also...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

*THESE KITS ARE MADE TO ORDER - PLEASE ALLOW AN ETA OF 6-8 WEEKS FOR FABRICATION AND ASSEMBLY OF KIT - IMAGES ARE FOR REFERENCE ONLY* The Skyline S...

SUITS AFTERMARKET TURBOCHARGERS IN LOW MOUNT POSITION ONLY! Turbo oil/water feed line kits includes -3AN 200 series stainless steel Teflon hose and...

TSS Lanyards are in stock and ready to ship!Our lanyards are an extremely soft material and feel like excellent quality when in the hands or around...

The Turbosmart FPR10 Series provides market-leading fuel control and response via true 1:1 ratio and superior flow and bypass capacity for vehicles...