Black Friday

PLEASE CONTACT US AFTER PLACING YOUR ORDER, TO MAKE SURE WE GOT THE CONFIGURATION AND COLOR RIGHT. RB26 MULTI THROTTLE & V1 FUEL RAIL Multi V1...

The Hypertune design and made in Australia are made to fit the Nissan BNR and BCNR GT-R. This front mount intercooler is a direct replacement inter...

All intake runners are setup to work with 6 injector or 12 injectors. If you choose the 6 injector setup, the secondary 6 injectors will not be dr...

*FUEL RAIL AND THROTTLE BODY IS NOT INCLUDED PLEASE CONTACT US AFTER PLACING YOUR ORDER, TO MAKE SURE WE GOT THE CONFIGURATION AND COLOR RIGHT. 45M...

Features G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP 62mm TURBOCHARGER COMPRESSOR WHEEL 77% MAXIMUM COMPRESSOR EFFICIENCY MAR-M ALLOY TURBIN...

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech. Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes:...

Extension Cable for Haltech Multi-Function CAN Gauge.Length: 150cm (5') Part number: HT-061012

GaugeART CAN OLED Gauge - Daisy-chain cable (41-001.11) Part number: HT-061011

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...

Plug and Pins Only - Delphi 2 Pin GM style Air temp (Grey). Suits: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Larg...

Plug and Pins Only - Delphi 2 pin GM style Coolant Temp. Suits: HT-010300 - Coolant Temp Sensor - Small Thread HT-010302 - Coolant Temp Sensor -...

Adaptor - Brass 1/8"NPTF to 3/8"NPTF. Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger t...

Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum. Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread. Part numbe...

Weld Fitting M12 x 1.5 - Small Thread Water Temp Aluminum. Suits: Coolant Temp Sensor - Small Thread Part number: HT-010330

Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum. Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread. Part numbe...

Weld Fitting M14 x 1.5 - Small Thread Air Temp Aluminum. Suits: Air Temp Sensor - Small Thread. Part number: HT-010230

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...

Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel, yellow ...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector. Part Number: HT-030010

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil. Suits: HT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI ...

Plugs and Pins Only - Suit IGN-1A IGBT Coil with Ignitor. Part number: HT-020115

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...

LS1 Coil with built-in Ignitor Includes: Matching plug and pins. Part number: HT-020102

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Plugs and Pins Only - Suit Idle Air Motor 2 Screw Style Part number: HT-020307

Plugs and Pins Only - Suit Idle Air Control Motor - Screw-in Part number: HT-020303

High Output CDI Coil - inc Plug & Pins. Includes: Matching Delphi plug and pins. Part number: HT-020132

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...