Black Friday

HARNESS OVERVIEW: The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wir...

The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this Plug and ...

M10 x 1.0 to 1/8 NPT AdaptorThread: M10 x 1.0 Female to 1/8NPTF Male Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x...

M10 x 1.0 to 1/8 BSPT Adaptor - Stainless Steel. Suits: Bosch Fluid Pressure and Temperature Sensor - HT-010920 Includes: 1x M10x 1.0 to 1/8 BSP...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...

Plug and Pins Only 16 Pin TYCO. Suits: Platinum PRO Plug-in Auxillary I/O Platinum Sport GM Plug-in Auxillary I/O TCA 2 & TCA 4 Elite 750 P...

Plug and Pins Only 24 Pin TYCO. Suits: IO12 Expander Box WBC1, & WBC2 Controller Device Emulator 8 Includes: Pack of 24 Pins. Part Number:...

IO 12 Expander Box - 2.5m/8ft Flying Lead Harness Only Length: 2.5m (8') Suits: CAN ID - Box A or B Part Number: HT-049902

Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 Dash to display the data obtained from the vehicles OBD II system in real time. Length:...

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU's Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs...

Hi Octane Racing billet drive mandrel, designed to run on the following ATI Performance balancers: ATI RB26 damper ATI RB 750hp Damper 918599 (5.5...

Features G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP 62mm TURBOCHARGER COMPRESSOR WHEEL 77% MAXIMUM COMPRESSOR EFFICIENCY MAR-M ALLOY TURBIN...

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech. Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes:...

Extension Cable for Haltech Multi-Function CAN Gauge.Length: 150cm (5') Part number: HT-061012

GaugeART CAN OLED Gauge - Daisy-chain cable (41-001.11) Part number: HT-061011

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...

Plug and Pins Only - Delphi 2 Pin GM style Air temp (Grey). Suits: HT-010200 - Air Temp Sensor - Small Thread HT-010202 - Air Temp Sensor - Larg...

Plug and Pins Only - Delphi 2 pin GM style Coolant Temp. Suits: HT-010300 - Coolant Temp Sensor - Small Thread HT-010302 - Coolant Temp Sensor -...

Adaptor - Brass 1/8"NPTF to 3/8"NPTF. Suits: 1/8" NPT Sensors Includes: Adaptor Only Notes: Tightening Torque: 1.5 - 3 TPFT (Turns past finger t...

Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum. Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread. Part numbe...

Weld Fitting M12 x 1.5 - Small Thread Water Temp Aluminum. Suits: Coolant Temp Sensor - Small Thread Part number: HT-010330

Weld Fitting 3/8 NPT - Suit Large Air Temp - Aluminum. Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread. Part numbe...

Weld Fitting M14 x 1.5 - Small Thread Air Temp Aluminum. Suits: Air Temp Sensor - Small Thread. Part number: HT-010230

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...

Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel, yellow ...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector. Part Number: HT-030010

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil. Suits: HT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI ...

Plugs and Pins Only - Suit IGN-1A IGBT Coil with Ignitor. Part number: HT-020115

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...