Black Friday

AtomX Small, but mighty!  The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has ...

MonsoonX More features, more powerful. The MonsoonX has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data...

LSU 4.9 Plug Kit | 101-0127

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

High Power Inductive Coil with built-in ignitor. Produce 103 mJ per spark, with a longer spark duration (2.9 ms) than what you’d see with a capaci...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Link TCC04 4 Channel EGT to CAN module, powered by CANchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples an...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and...

Brand New Nissan OEM Shifter Socket Wave Washer to suit the Following Makes and Models: R32 Skyline GTS / GTST / GTR R33 Skyline GTS / GTST / GTR ...

Brand New Nissan OEM Leather Gear Shift Knob / Gear Knob to suit: R32 GTS / GTST / GTR R33 GTS / GTST / GTR R34 GT / GTT

Genuine Nissan O2 Sensor Connector Plug to suit: Nissan Skyline 2.5ltr RB25DET R33 1993-1998

Genuine Nissan Transfer Case Gear Oil Filter / Strainer Assembly.This unit must be replaced with servicing your transfer case.This kit suits the fo...

Genuine Nissan Skyline Oil Cap Seal to suit: R32 GTR / GTSt / GTS R33 GTR / GTSt / GTS R34 GTR / GTt / GT Part Number: 15270-D0103  

Genuine OEM Nissan item,  oil filter Housing block adapter gasket that sits between the oil filter block and the engine block.Application:R31 Skyli...

FOR MORE EMBLEMS AND BADGE SETS, CLICK HERE!**ULTRA RARE AND DISCONTINUED**Brand New Genuine Nissan GTS25T Badge / Emblem in OEM Chrome to suit: N...

FOR MORE EMBLEMS AND BADGE SETS, CLICK HERE!ULTRA RARE - Brand New Genuine Nissan GTS4 Badge / Emblem to suit: Nissan Skyline R33 GTS4 Perfect fo...

FOR MORE EMBLEMS AND BADGE SETS, CLICK HERE!ULTRA RARE - Brand New Genuine Nissan GTS Badge / Emblem to suit: Nissan Skyline R33 GTS Perfect for ...

FOR MORE EMBLEMS AND BADGE SETS, CLICK HERE!**SOLD AS A PAIR ONLY**ULTRA RARE and DISCONTINUED - Brand New Genuine Nissan 40th Anniversary Badge se...

Genuine Nissan Skyline Rear Diff Thrust Washer to suit: R32 GTR / GTS-4 / GTS / GTST R33 GTR / GTS-4 / GTS / GTST R34 GTR / 25GT-4 / GT / GTT P...

RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8...

Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator LEDs each. Four additio...

Triple Bundle - Includes 3 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tr...

Bundle - Includes 2 x Razor PDMs. Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces tradition...

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...

Donut style 8mm hole Includes plug and pin kit 

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.

Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flan...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use ...