Black Friday

Dual Switch Panel Only - includes Yellow knob. Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT i...

Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Triple Switch Panel Only - includes Yellow & Red knobs Includes: Triple panel, yellow ...

12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Switch Panel Only - includes Yellow knob Includes: Dual panel, yellow adjustment knob a...

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

A selection of pre designed, semi transparent labels to suit the backlit Haltech CAN Keypads. Suits: Haltech CAN Keypads Includes: 5 Label Sheet ...

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad. Suits: CAN Keypad 2 x 4 and 3 x 5 Includes: 1 x HT-130045 - Adaptor HarnessLength: 200mm Notes: ...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Loom Only - Length: 2.0m (78"). Part Number: HT-040024

Plug and Pins Only - AMP 26 Pin 2 Row Superseal Connector. Part Number: HT-030010

Choose from the following options: Part Number HT-020039 - HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead Kit - Length: 2.0m (78"). P...

6 Channel Ignition Extension Harness - 1200mm / 47.2"Length: 1200mm / 47.2".  Suits: Selected Haltech Terminated Engine Harnesses Includes: 1 x HT-...

Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil. Suits: HT-020112 - High Output Inductive Coil suit HPI modules HT-020132 - High Output CDI ...

Plugs and Pins Only - Suit IGN-1A IGBT Coil with Ignitor. Part number: HT-020115

High Output Inductive Coil suit HPI modules Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must b...

LS1 Coil with built-in Ignitor Includes: Matching plug and pins. Part number: HT-020102

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305

Plugs and Pins Only - Suit Idle Air Motor 2 Screw Style Part number: HT-020307

Plugs and Pins Only - Suit Idle Air Control Motor - Screw-in Part number: HT-020303

High Output CDI Coil - inc Plug & Pins. Includes: Matching Delphi plug and pins. Part number: HT-020132

Analogue Output Adaptor. Outputs: Converts a PWM Output to 0-5v Analogue Signal. Suits: e.g for use with Evo 10 AWD controller. Includes: HT-031016...

PAGE UP FOR POWER!!! Suits: Anyone who knows what's up Part number: HT-309023

Haltech "Classic" Face Mask Suits: Your face Includes: 1 x Face Mask Part number: HT-309029

Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or f...

Water proof Elite USB Cap Only (Supplied as a pair) Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps. Part number: H...

Crimping tool - Suits DTM Series Solid Contacts. Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Not...

Crimping tool - Suits DT Series Solid Contacts. Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping To...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Linear Position Sensor - 1/2" - comes in a range of 100mm/150mm/200mm/250mm.Full list below:1. HT-011211 100mm Travel Length: Between Mounting Hole...

Linear Position Sensor - 1/2" - comes in a range of 5omm/100mm/150mm/200mm/250mm.Full list below:1. HT-011201 50mm Travel Length: Between Mounting ...

SUITS: Haltech iC7 Display Dash INCLUDES: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo NOTES:...

Features G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP 1.01 V-BAND REAR HOUSING. 68mm TURBOCHARGER COMPRESSOR WHEEL 78% MAXIMUM COMPRESSOR EFF...

**THE ULTIMATE RB25/RB26 STOCK BLOCK TURBOCHARGER FOR 500HP AT THE WHEELS**BOOSTED B5855 V-Band Turbocharger Specifications ( AF8005-3048 )Recommen...

**THE ULTIMATE RB25/RB26 STOCK BLOCK TURBOCHARGER FOR 500HP AT THE WHEELS**BOOSTED B5855 V-Band Turbocharger Specifications ( AF8005-3048BLK )Recom...

PART NUMBER: AF8277-6000 Model - Nissan RB30 engine turbo steampipe manifold.Turbo Collector Flange - T4 twin entry.Mounting Location - High Mount ...

Part Number: AF8407-4000 Model - Nissan RB20, RB25 & RB26 (single turbo conversion) turbo stainless steampipe manifold.Turbo Collector Fl...

**THE ULTIMATE RESPONSE FOR STOCK MANIFOLD LOW MOUNT SETUPS, WE RECOMMEND PAIRING THIS UP WITH A V-BAND ADAPTOR WHICH YOU CAN FIND BY CLICKING HERE...

A must have for any Holden RB30 Single Cam engine build, this uniquely designed headgasket is forged to harness the best sealing properties from Co...

Thermal Management Blanket to suit our Nissan RB V-Band Reverse Rotation Exhaust Manifold. This will help reduce under bonnet temps and help save s...

Features G SERIES COMPRESSOR AERODYNAMICS FOR MAXIMUM HP 68mm TURBOCHARGER COMPRESSOR WHEEL 78% MAXIMUM COMPRESSOR EFFICIENCY MAR-M ALLOY TU...