Black Friday

Part Number: MSTS-2P-EAT-SS-G15 Includes: Optioned Mating Connector: DTM06-2S / DTM06-2S-E007 w/ PVC Protection Cap (Protect glass element in trans...

Billet sensor manifold to fit 1/8 10NPT sensors, a neat and more accessible way of mounting and plumbing your sensors in the engine bay. Can be use...

OEM Nissan Coils

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...

Donut style 8mm hole Includes plug and pin kit 

Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current o...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.

Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flan...

This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...

The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...

The Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...

E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use ...

Link's external E-throttle (Drive by Wire) module works with all Link's G4X ECUs (except the entry level AtomX), plus all G4+ ECUs (Storm and above...

Extreme Duty Fast Response EGT Temperature Probe  Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustab...

This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fury and G4+Thunder ECU...

This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuilt igniters.Common use...

Bosch 4000 PSI Fluid Pressure and Temperature Sensor Thread: M10 x 1.0 Includes: Includes: Matching plug, pins and seals Notes: Used to measure flu...

TMS-4 OVERVIEW - The TMS-4 can fire several optional trouble codes, including: Pressure High / Pressure Low Temperature High Air Leak Detected S...

Throttle Position Sensor -Grey CW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Cloc...

Throttle Position Sensor -Black CCW Rotation 8mm D-Shaft.Rotation: 8mm D-Shaft Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black C...

Throttle Position Sensor Motorsport Contactless 8mm TPSSize: 8mm D-Shaft. Suits: CW & CCW Rotation. Includes: Matching Set of Deutsch DTM-3 C...

Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Part number: H...

Coolant Temp Sensor - 1/8 NPT Thread. Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading. Part num...

Plug and Pins Only - Suit Flex Fuel Composition Sensor. Suits: GM Flex Fuel Sensors. Includes: Plug + Pack of 3 pins.Part number: HT-011001

Haltech - 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the som...

Haltech - 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest v...

Haltech - 7 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech - 5 Bar "TI" MAP Sensor Thread: 1/8 NPT.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why...

Haltech 1 Bar GM MAP Sensor.Haltech Map sensors are used in the some of the worlds quickest vehicles, it is not hard to see why these sensors are r...

Suits: NTK Sensor Includes: Dual Channel, CAN Wideband Controller, 2 x NTK Sensors, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, ...

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit. Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure s...

Idle Air Control Kit - Haltech Billet. Diameter: 10mm (3/8") Includes: Matching plugs and pins. Part number: HT-020305