Products

Tacho Output Adaptor.Outputs: 1 x Coil Negative emulated signal Includes: Matching Set of DTM 4 Connector plug and pins Notes: Requires Spare DPO o...

Haltech Neoprene Stubbie Cooler (Koozie). Part number: HT-309004

PAGE UP FOR POWER!!! Suits: Anyone who knows what's up Part number: HT-309023

Haltech "Classic" Face Mask Suits: Your face Includes: 1 x Face Mask Part number: HT-309029

Keep the sun off your tyres and help maintain consistency in your tyre pressures. Includes 7 suction cup mounting points for mounting to steel or f...

Water proof Elite USB Cap Only (Supplied as a pair) Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Two water proof caps. Part number: H...

Crimping tool - Suits DTM Series Solid Contacts. Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2 Includes: 1 x DTM Crimper Not...

Crimping tool - Suits DT Series Solid Contacts. Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2 Includes: 1 x DT Crimping To...

Crimping tool - Suits DTP Series Solid Contacts. Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2 Includes: 1 x DTP Crimping Tool...

Software Resource USB KEY With Lanyard - Custom Includes: 1 USB Key and Lanyard Part number: HT-200102

USB Connection Cable 2m - Haltech Branded Suits: Platinum Sprint, Sport, Pro and Elite range of ECU's Includes: USB A to USB B Cable - 2 meters - U...

Water proof Elite USB Connection Cable 2.4m/8ft Type B, Suits: Elite ECUs (excluding Elite Pro Plug-in) Includes: Water proof cap. Part number: HT...

Knock Sensor Suits 2014 Pro Tuner "Knock Ears" Kit Part number: HT-070105

Pro Tuner Knock Ears Kit 2014 Included: Two x 2 wire knock sensors with AMP style connector. Single 3 wire knock sensor lead with shield for conne...

Ideal for racers who want to log and analyse linear position of moving components like suspension travel, steering angle or gearbox position. Suits...

Linear Position Sensor - 1/2" - comes in a range of 100mm/150mm/200mm/250mm.Full list below:1. HT-011211 100mm Travel Length: Between Mounting Hole...

Linear Position Sensor - 1/2" - comes in a range of 5omm/100mm/150mm/200mm/250mm.Full list below:1. HT-011201 50mm Travel Length: Between Mounting ...

Boost Control Solenoid 4 Port, Used to control a wider range of boost pressure.Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb ...

The All New V2 Billet Exhaust Side Solid Engine Mount (RBENGMT) with a stylish new design and updated fitting kit.This part fits the following vehi...

The Turbosmart Modular Reference Manifold, is an expandable, professional solution for remote mounting and sharing of engine (MAP) reference ...

The Turbosmart Modular Combo (Reference & Sensor) Manifold, is an expandable, professional solution for remote mounting expensive and delic...

The Turbosmart Modular Remote Sensor Manifold, is an expandable, professional solution for remote mounting expensive and delicate sensors away fr...

Collar Tool Suit GenV WG45/WG50 HyperGate45 & ProGate50, including ProPort Blow Off Valve. Does not suit other size Wastegates and Does not sui...

Locking Collar C Spanner Tool designed for use with the Locking Collar system as found on various Turbosmart Products including: Gen4 Raceport Blow...

Collar Tool Suit PowerPort Blow Off Valve by Turbosmart. Required for servicing and spring changes. Does not suit RacePort or ProPort Valves. Part ...

The Gen-V Pro Port ‘Sensor Cap’ allows you to monitor blow-off valve (BOV) position for diagnostic or tuning purposes, a true unique solution and f...

*IMAGE FOR REFERENCE ONLY* Replacement Stainless Steel 44 micron Filter Elemenet, Suitable for OPR Turbosmart Oil Pressure Regulators, Turboc...

*IMAGE FOR REFERENCE ONLY* Billet Mounting Bracket to suit Turbosmart Oil Pressure Regulator (V2).

  *IMAGE FOR REFERENCE ONLY*Rebuild and Service Kit to Suit Turbosmart Oil Pressure Regulator (v2) including filter and O-rings.

Turbosmart’s ALL NEW from 2022 OPR V2 Turbocharger Oil Pressure Regulator provides rock solid oil pressure for your turbocharger from a simple,...

Mounting bracket for G4+ & G4X Fury, Xtreme, Storm, Force (MTB1)

Mounting bracket for G4+ & G4X Atom & Monsoon (MTB2)

Mounting bracket for G4+ Thunder.

More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...

Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. Th...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Li...

KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock senso...

For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...

Small Diameter Trigger wheel – Medium and Large sizes also available.  24 tooth 150mm diameter 40mm centre

Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.

Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.

Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.F...

Technical Specs and Wiring: Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Up to 150 PSI above atmospheric pressure,...